Screen displays (continued)

26Image stabilization display

This is displayed when the OIS button is pressed and image stabilization is activated.

27Scene file name display

Indicates the name of currently selected SCENE FILE (F1 to F6).

28Remaining battery charge

As the remaining battery charge drops, the

display changes as follows: → →

→ → .

When the battery is completely discharged,

( ) blinks.

(When the AC adaptor is being used, a display

other than may appear: this is not a sign of malfunctioning.)

•Remaining battery capacity may not be displayed correctly with use at high or low temperatures, or when the battery has not been used for a long period of time. To ensure that remaining battery capacity is displayed correctly, use the battery completely from a fully-charged state, and charge the battery again. (Remaining battery capacity may still not be displayed correctly if the battery has been used for long periods at high or low temperatures, or if the battery has been recharged a large number of times.)

•The remaining battery capacity display is a guideline and may change according to usage conditions.

29Digital zoom display

This displays the digital zoom ratio. D2x: 2x

D5x: 5x

D10x: 10x

30One-clip recording mode display

1-CLIP:

Indicates that recording has started for a new clip in one-clip recording mode.

1CLIP:

Indicates that recordings can be compiled to a previous clip in one-clip recording mode.

31Media remaining memory display

•Set the menu option P2CARD REMAIN in the DISPLAY SETUP screen to ONE-CARD to display the remaining time on the P2 card being recorded and show the number of the slot it resides in on the left.

TOTAL displays the remaining time on both cards.

•In a mode check, ONE-CARD and TOTAL are alternately displayed.

•This display does not appear while remaining memory is calculated and when the camera- recorder is in USB device mode.

•A mode check during loop recording displays the standard recording time available to loop recording.

•Indicates remaining time in 1-minute increments from 0 to 999 minutes. 999 minutes and longer time periods are also indicated as 999 minutes.

•The display blinks when 2 minutes or less time is left.

32Media information display

Indicates the slots that contain P2 cards and general information on the media.

1  On: P2 card ready for recording

1  lights green:

P2 card selected for recording

1  flashes: The card is being recognized

- : No card inserted P  : Write-protected F  : Full

X  : Cannot recognize

E  : P2 card in an invalid format (formatting will take care of this problem)

124