Setup menus (continued)

<VIDEO> (continued)

No./Item

 

 

 

Description of setting

 

 

 

 

 

 

 

 

689*1

This is used to select the method to process the

COMP MODE

image compression during recording.

 

 

 

 

 

0000 NORMAL

 

The images are recorded using the regular

 

compression processing.

 

0001

DARK

 

The images are recorded while minimizing the

 

compressed image distortion which arises in the

 

dark areas below about 10 IRE (70 mV).

 

<Notes>

 

z This setting is valid when recording in the 720p

 

mode.

 

z When [DARK] is selected, the indication (c)

 

blinks to the left of the second line of the super-

 

imposed indication.

 

 

 

 

690*1

This selects whether or not to record the UMID

UMID REC

information on the tape.

 

 

 

 

 

0000

OFF

 

UMID information is not recorded on the tape.

 

The [EE] output is also blank.

 

0001

 

ON

 

The UMID set in menu No. 691 UMID GEN is

 

recorded. If no Basic UMID is available in the

 

input signals, a Basic UMID of the unit, which is

 

newly generated, is recorded.

 

<Note>

 

UMID information cannot be rewritten in this unit.

 

 

 

 

691*1

This selects a UMID that is recorded when

UMID GEN

menu No. 690 UMID REC is turned “ON”.

 

 

 

 

 

0000

 

INT

 

Newly created basic UMID information of this

 

unit is always recorded.

 

0001

EXT

 

The UMID information of the input signals is

 

recorded. If no UMID is available in the input

 

signals, a Basic UMID of the unit, which is newly

 

generated, is recorded.

 

<Note>

 

The source pack (of the UMID information) of the

 

input signal will be recorded on the tape, regardless

 

of this menu’s setting.

 

 

 

 

692*1

This sets the line on which the UMID

UMID

information is to be superimposed.

 

 

 

 

POS

0000

BLANK

 

 

0001

12L

 

:

:

 

 

0006

17L

 

:

:

 

 

0008

19L

 

<Notes>

 

z The line selected for the menu item No. 501

 

VITC POS-1 and No. 502 VITC POS-2 settings

 

cannot be selected for this item.

 

z Even if

F4

(RESET) is pressed while the

 

settings are changed, the settings does not

 

return to the factory settings.

 

z Metadata recorded on the tape will be output

 

giving UMID information first priority. When

 

metadata is output, set to a line other than the

 

original multiplexed line or select “BLANK.”

 

 

 

 

 

No./Item

Description of setting

693This selects gamma correction.

GAMMA SEL

0000 OFF

Gamma correction is not carried out.

0001 GAMMA1

This corrects video images shot with the cine gamma FilmREC mode of the Varicam to images of film quality (equivalent to Telecine 5 of HD Gamma Corrector in AJ-GBX27G).

0002 GAMMA2

This corrects video images shot with the cine gamma FilmREC mode of the Varicam to images of film quality (equivalent to Telecine 6 of HD Gamma Corrector in AJ-GBX27G).

0003 GAMMA3

This converts video images shot with the cine gamma FilmREC mode of the Varicam into the Cineon curve appropriate for film recording.

1023

 

 

 

 

 

 

 

 

 

 

 

 

 

 

768

 

 

 

 

 

 

 

 

 

 

 

 

 

 

512

 

 

 

 

 

TELECINE5

 

 

 

 

 

 

 

 

 

 

TELECINE6

256

 

 

 

 

 

 

 

 

 

 

 

 

Cineon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

256

512

768

1023

 

<Notes>

zGamma correction is effective in the following conditions.

ŠWhen the VTR operation mode is VV (TAPE) and 720p is displayed in the system format.

However, when the 23/24 mode is selected in System Menu No. 25 (SYSTEM FREQ), or 59/ 60 and 50i/25p are selected in System Menu No. 25 (SYSTEM FREQ), as well as performing the cross conversion from 720p to 1080i, gamma correction is not performed for SD output.

zIf it is set to execute gamma correction, the GM indicator in the time code display lights constantly.

zWhen the power of the unit is turned OFF, the settings in this item also return to [OFF].

zThis item is not effective for 1394 output.

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

*2 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, 50 Hz (HD, SD) mode or 50 Hz mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

The underlining (__) denotes the factory setting mode.

101