Panasonic AJ-HD1800P System menus, <Note, <Note, Video output signal adjustments

System menus

No./Item		Description of setting
05	For setting whether to perform the various
	adjustments for the video output signals using this
ENCODER	VTR or using an external encoder remote controller.
SEL	0000 REMOTE
	The various adjustments for the video output
	signals are performed by an external encoder
	remote controller.
	0001	LOCAL
	The various adjustments for the video output
	signals are performed using this VTR.
	0002	BOTH
	The various adjustments for the video output
	signals are performed using both this VTR and
	an external encoder remote controller.
	<Notes>
	z When an adjustment is made with the external
	encoder remote controller, the new values are
	reflected in the appropriate section of the Setup
	Menu. The adjusted values are stored on the unit
	approximately 5 seconds after making the
	adjustment. To turn off the power after making
	the adjustment with the external encoder remote
	controller, wait approximately 5 seconds or more
	after completion of the operation before turning
	the power off.
	z For the IEEE 1394 digital output, settings are
	disabled in this menu.
06	For selecting what is to be controlled when the
	video output level is to be adjusted by an
V LEVEL	external encoder remote controller.
CTRL	0000	HD
	The HD video output level can be adjusted.
	0001	SD
	The SD video output level can be adjusted.
	0002	BOTH
	Both the HD and SD video output levels can be
	adjusted.
	<Note>
	When [CMPST] is selected in Setup Menu No.
	650 (STYLE), [BOTH] is selected be default
	regardless of the settings for this item.

The underlining (__) denotes the factory setting mode.

Video output signal adjustments

The control matrix for the adjustments is shown in the table below.

Setting		Adjustment item
05:	06:	653: Y LVL (HD)	658: Y LVL (SD)
ENCODER	V LEVEL	654: Pb LVL (HD)	659: Pb LVL (SD)
SEL	CTRL	655: Pr LVL (HD)	660: PrVL (SD)
		656: BK LVL (HD)	661: BK LVL (SD)
REMOTE	HD	External encoder	No adjustments
		remote controller	possible
	SD	No adjustments	External encoder
		possible	remote controller
	BOTH	External encoder	External encoder
		remote controller	remote controller
LOCAL	HD
		This unit	This unit
	SD
	BOTH
BOTH	HD	External encoder
		remote controller/	This unit
		this unit
	SD		External encoder
		This unit	remote controller/
			this unit
	BOTH	External encoder	External encoder
		remote controller/	remote controller/
		This unit	this unit

External encoder remote controller:

Only adjustments of the external encoder remote controller are performed.

This unit：

Only adjustments of the setup menu items are performed. External encoder remote controller/this unit：

Adjustments can be performed from both the external encoder remote controller and setup menus.

<Note>

Use the AJ-ER50, an optional accessory, as the external encoder remote controller. However, its VIDEO PHASE and SYNC PHASE controls will not work.

When “CMPST” has been selected as the setup menu item No.650 (STYLE) setting

Setting		Adjustment item
05:	06:	662: V LEVEL
ENCODER	V LEVEL	663: C LEVEL
SEL	CTRL	664: HUE
		665: SETUP LVL
REMOTE	HD	External encoder
	SD
		remote controller
	BOTH
LOCAL	HD
		This unit
	SD
	BOTH
BOTH	HD	External encoder
	SD	remote controller/This
		unit
	BOTH

External encoder remote controller:

Only adjustments of the external encoder remote controller are performed.

This unit:

Only adjustments of the setup menu items are performed. External encoder remote controller/This unit:

Adjustments can be performed from both the external encoder remote controller and setup menus.

<Note>

Use the MT-2000 (manufactured by Musashi and recommended by Panasonic) as the external encoder remote controller. However, its VIDEO PHASE, SYNC PHASE and SC PHASE controls will not work.

80