Panasonic AJ-HD1800P manual 103

Setup menus (continued)

<AUDIO>	(continued)
No./Item			Description of setting
709		For selecting the CUE output reference level.
CUE OUT LV		0000	4dB
		0001	0dB
		0002	-3dB
		0003	-20dB
710		For selecting the audio monitor output (Lch)
		reference level.
MONIL OUT LV		0000	4dB
		0001	0dB
		0002	-3dB
		0003	-20dB
711		For selecting the audio monitor output (Rch)
		reference level.
MONIR OUT		0000	4dB
LV
		0001	0dB
		0002	-3dB
		0003	-20dB
712		For selecting whether the volume of audio
		monitor output is interlocked to the volume
MONI OUT		adjustment knob or not.
		0000	UNITY
		The signals are output at a fixed level.
		0001	VAR
		The signal output is coupled with the head-
		phones volume control.
713*1,2		For selecting the CH1 input signal.
CH1 IN SEL		0000	INT SG
		The internal signal is selected.
		0001	DIGI
		Digital input signals are selected.
		0002	ANA
		Analog input signals are selected.
		<Note>
		When DIGI has been selected, whether serial or
		AES is selected for the input is determined by the
		setting selected for setup menu item No.721 (D IN
		SEL 12).
714*1,2		For selecting the CH2 input signal.
CH2 IN SEL		0000	INT SG
		The internal signal is selected.
		0001	DIGI
		Digital input signals are selected.
		0002	ANA
		Analog input signals are selected.
		<Note>
		When DIGI has been selected, whether serial or
		AES is selected for the input is determined by the
		setting selected for setup menu item No.721 (D IN
		SEL 12).
715*2		For selecting the CH3 input signal.
CH3 IN SEL		0000	INT SG
		The internal signal is selected.
		0001	DIGI
		Digital input signals are selected.
		0002	ANA
		Analog input signals are selected.
		<Note>
		When DIGI has been selected, whether serial or
		AES is selected for the input is determined by the
		setting selected for setup menu item No.722 (D IN
		SEL 34).

No./Item		Description of setting
716*1,2	For selecting the CH4 input signal.
CH4 IN SEL	0000	INT SG
	The internal signal is selected.
	0001	DIGI
	Digital input signals are selected.
	0002	ANA
	Analog input signals are selected.
	<Note>
	When DIGI has been selected, whether serial or
	AES is selected for the input is determined by the
	setting selected for setup menu item No.722 (D IN
	SEL 34).
717*1,2	For selecting the CH5 input signal.
CH5 IN SEL	0000	INT SG
	The internal signal is selected.
	0001	DIGI
	Digital input signals are selected.
	0002	ANA
	Analog input signals are selected. (CH1 input)
	<Note>
	When DIGI has been selected, whether serial or
	AES is selected for the input is determined by the
	setting selected for setup menu item No.723 (D IN
	SEL 56).
718*1,2	For selecting the CH6 input signal.
CH6 IN SEL	0000	INT SG
	The internal signal is selected.
	0001	DIGI
	Digital input signals are selected.
	0002	ANA
	Analog input signals are selected. (CH2 input)
	<Note>
	When DIGI has been selected, whether serial or
	AES is selected for the input is determined by the
	setting selected for setup menu item No.723 (D IN
	SEL 56).
719*1,2	For selecting the CH7 input signal.
CH7 IN SEL	0000	INT SG
	The internal signal is selected.
	0001	DIGI
	Digital input signals are selected.
	0002	ANA
	Analog input signals are selected. (CH3 input)
	<Note>
	When DIGI has been selected, whether serial or
	AES is selected for the input is determined by the
	setting selected for setup menu item No.724 (D IN
	SEL 78).

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

*2 When 1394 is selected in System Menu No. 600 (VIDEO IN SEL), it is the 1394 input regardless of the selection in this menu.

The underlining (__) denotes the factory setting mode.

103