Panasonic AJ-HD1800P manual 108

Setup menus (continued)

<AUDIO>	(continued)
No./Item		Description of setting
755	For selecting the audio CH2 signal to be
	superimposed onto the SD SDI output
SD SDI CH2	0000	CH1
SL
	The CH1 signal is output.
	0001	CH2
	The CH2 signal is output.
	0002	CH3
	The CH3 signal is output.
	0003	CH4
	The CH4 signal is output.
	0004	CH5
	The CH5 signal is output.
	0005	CH6
	The CH6 signal is output.
	0006	CH7
	The CH7 signal is output.
	0007	CH8
	The CH8signal is output.
756	For selecting the audio CH3 signal to be
	superimposed onto the SD SDI output
SD SDI CH3	0000	CH1
SL
	The CH1 signal is output.
	0001	CH2
	The CH2 signal is output.
	0002	CH3
	The CH3 signal is output.
	0003	CH4
	The CH4 signal is output.
	0004	CH5
	The CH5 signal is output.
	0005	CH6
	The CH6 signal is output.
	0006	CH7
	The CH7 signal is output.
	0007	CH8
	The CH8signal is output.
757	For selecting the audio CH4 signal to be
	superimposed onto the SD SDI output
SD SDI CH4	0000	CH1
SL
	The CH1 signal is output.
	0001	CH2
	The CH2 signal is output.
	0002	CH3
	The CH3 signal is output.
	0003	CH4
	The CH4 signal is output.
	0004	CH5
	The CH5 signal is output.
	0005	CH6
	The CH6 signal is output.
	0006	CH7
	The CH7 signal is output.
	0007	CH8
	The CH8signal is output.

758For selecting how to process the digital audio output slow signals in the JOG, VAR or SHTL

JOG PROC mode.

0000 OFF

The sound without having the digital audio output slow signals processed is output even when the STILL mode is established.

0001 ON

The sound after having the digital audio output slow signals processed is output.

The underlining (__) denotes the factory setting mode.

108

No./Item		Description of setting
759	For selecting the audio output level during DV
	format playback.
DV PB ATT	0000	OFF
	The audio output level is not attenuated.
	0001	ON
	The audio output level is attenuated.
760*1	For selecting whether to mute the sound at the
	joins between recordings during DV or DVCAM
REC PT	format playback.
MUTE	0000	OFF
	The sound is not muted.
	0001	ON
	The sound is muted
761*1	For selecting the type of internal signal.
AUDIO INT	0000	TONE
	A sine wave signal is selected.
SG
	0001	SILNCE
	A silent signal is selected.
762	This item enables signals to be recorded and
	played back without passing them through the
AUD RATE	rate converter in the audio input/output section
CON	(without engaging the digital filter).
	0000	OFF
	The signals are recorded and played back with-
	out passing them through the rate converter.
	0001	ON
	The signals are recorded and played back after
	passing them through the rate converter.
	<Note>
	z ON/OFF control is exercised at the same time for
	CH1 to CH8. ON or OFF cannot be set indepen-
	dently for each channel.
	z When the rate converter is turned OFF, video
	input must be synchronized with the reference
	signal selected in [OUT REF]. (If they are not
	synchronized, noise may be generated.)
	z In the 60 Hz mode, noise may occur if OFF is set
	for the rate converter.
763	For selecting the scale display of the audio
	level meter.
METER	0000	PEAK_0
SCALE
	The audio level is displayed with 0 dB as the
(This menu is	maximum level.
not displayed	0001	REF_0
for AJ-	The audio level is displayed with 0 dB as the
HD1800E.)	reference level.
	<Note>
	When FS-18 or FS-12 is selected in Setup Menu
	No. 776 (REF LEVEL), the system operates as
	PEAK-0 regardless of the settings in this menu.
776	For setting the standard audio level (Headroom)
REF LEVEL	0000	FS-20
	ー 20 dB
	0001	FS-18*
	ー 18 dB
	0002	FS-12
	ー 12 dB
	* The asterisk denotes the factory setting for
	AJ-HD1800E.

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.