Function menus (continued)

<50P IN/OUT ASSIGN> (continued)Registering functions in the input pins/Active inputsRegistering functions in the output pins/Active outputs

1 Selecting the 50-pin connector pins

Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector into which the menu item is to be registered.

2 Entering the 50-pin connector pins

Press the ADJ dial.

The entered 50-pin connector pin display is highlighted.

3 Selecting the menu item

Turn the ADJ dial and select the menu item for the pin of the 50-pin connector which was selected in step 1 above

4 Entering the menu item

Press the ADJ dial.

The on-screen setting display now blinks.

5 Selecting the setting

Turn the ADJ dial and select the setting for the menu item which was selected in step 3 above.

6 Entering the setting

Press the ADJ dial.

What is to be operated by the ADJ dial returns to the front panel. Whatever was selected in step 3 is displayed as the registered item name and whatever was selected in step 5 is displayed as the registered value.

7 To select menu items and settings for other 50-pin connector pins, repeat steps 1 to 6.

8 Saving the data in the 50-pin registration file

To save what has been set in the 50-pin connector in the 50-pin registration file, press F5 (SET).

If F6 (EXIT) is pressed without the above settings have been saved, those settings will be canceled.

Clearing

1 Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector whose menu item is to be cleared.

2 Press F4 (RESET). The registered item name and registered value displays now go blank.

3 To clear the menu items in other 50-pin connector pins, repeat steps 1 and 2.

4 To save what has been set in the 50-pin connector in the 50-pin registration file, press F5 (SET).

If F6 (EXIT) is pressed without the above settings have

been saved, those settings will be canceled.

Resetting all the items and values

Press F4 (RESET) while holding down the F button. All

the registered item names and registered values are now set to the factory settings. (These settings cannot be restored.)

Special IN menu list

No.

 

SUPER

Description of setting

DISPLAY

 

 

 

Functions not

featured on the setup menua

B00

For transferring to the STANDBY ON mode.

STBY ON

 

 

 

B01

For transferring to the STANDBY OFF mode.

STBY OFF

 

 

 

B02

For alternately transferring to the STANDBY ON and

STBY

OFF mode.

ONOFF

 

 

 

B03

For transferring to the EJECT mode.

EJECT

 

 

 

B04

For prerolling the tape to the IN point when the IN

CUE

point has been registered; for prerolling the tape to

 

the current point when the IN point has not been reg-

 

istered.

 

 

B05

For registering the edit IN point.

IN SET

 

 

 

B06

For transferring to the still picture (STILL) mode.

STILL

 

 

 

B07

The 9-pin connector functions.

422 REM ON

 

 

 

B08

The 9-pin connector does not function.

422 REM

 

OFF

 

 

 

B09

For returning TC SOURCE to the previous EXT

TC EXT

mode.

 

(No switching occurs if the EXT mode is currently

 

established)

 

 

B10

For switching TC SOURCE to INT and TCG MODE

TC INT AUTO

to AUTO.

 

 

B11

For switching TC SOURCE to EXT_L and TCG

TC EXT_L

MODE to REGEN.

REG

 

 

 

SRC PROTECT and STOP PROTECT settings switched simultaneously

B20

For switching the tape protection mode operation to

PROTECT

half-loading in the event that the VTR has been left

HALF

standing in the STOP mode or the STILL mode while

 

any of the search modes (JOG/SHTL/SLOW) was

 

established.

 

 

B21

For switching the tape protection mode operation to

PROTECT

tension release when the VTR has been left stand-

T-REL

ing in the STOP mode or the STILL mode while any

 

of the search modes (JOG/SHTL/SLOW) was

 

established.

 

 

UPCON MODE and DOWNCON MODE settings switched simultaneously

B22

For switching the picture angle during down-

UD FIT H

conversion to letter box and the picture angle

 

during up-conversion to the top/bottom cut status

 

in the vertical direction.

 

 

B23

For switching the picture angle during down-

UD FIT-V

conversion to the side cut mode and the picture

 

angle during up-conversion to the side panel

 

mode.

 

 

B24

For switching the picture angle during down-

UD FIT-HV

conversion to the squeeze mode and the picture

 

angle during up-conversion to the stretch mode.

 

 

75