Panasonic AJ-HD1800P manual 107

Setup menus (continued)

<AUDIO>	(continued)
No./Item			Description of setting
745		For selecting the CH8 output status of the main
		signal line in the search mode.
CH8 CUE
SEL		0000	OFF
		The CUE signal is not output.
		0001	ON
		The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to
		[Audio outputs in the search mode] (page 109).
746		For selecting the monitor output.
MONI CH		0000	MANU
SEL		The signal selected by the MONITOR SELECT
		button is output.
		0001	AUTO
		The PCM audio signal is output in the j1.0k to
		i2.0k speed range; the CUE signal is automati-
		cally output at all other speeds.
		0002	PCM
		The PCM audio signal is output in the j32k to
		i32k speed range.
		<Notes>
		z When “AUTO” is selected and a tape in any
		format except DVCPRO HD-LP is played back,
		the PCM audio signals are output in the j1.0k
		to +1.1k speed range.
		z This setting takes effect when the L and R
		MONITOR SELECT switches on the VTR’s front
		panel have selected a channel from CH1 to CH8.
		(If they have selected CUE, the CUE signal is
		output at all speeds regardless of this menu
		item’s setting.)
747		For selecting the channel for the monitor output
		to be switched to CUE.
MON AUTO		When a setting other than “MANU” has been
SEL		selected for setup menu item No.746 (MONI CH
		SEL), the CUE signal is automatically output to the
		monitor output in accordance with the operation
		mode, and the monitor channel to be switched to
		CUE is selected automatically.
		0000	L/R
		The CUE signal is output both to the Lch and
		Rch.
		0001	L
		The CUE signal is output to the Lch only.
		0002	R
		The CUE signal is output to the Rch only
		<Note>
		For audio output conditions, refer to [Audio outputs
		in the search mode] (page 109).
748		For selecting whether to enable or inhibit the
		operation of the MONITOR SELECT button on
MONI SEL		the front panel.
INH		0000	OFF
		The button’s operation is enabled.
		0001	ON
		The button’s operation is inhibited.
		0002	ON1
		In the FULL display mode, operation is prohib-
		ited; in the FINE display mode only, operation is
		enabled.
		<Note>
		Whether to enable or inhibit the button’s operation
		can be selected for channels whose signals have
		not been mixed by the setup menu item No.737
		(MONI MIX) setting.

No./Item		Description of setting
749*1	For selecting whether the playback level
	adjustment controls are to function in the EE
AUDIO PB	mode when INT SG has been selected on the
VR	<AUDIO> function menu.
	0000	DIS
	The INT SG output level is fixed at the UNITY
	level.
	0001	ENA
	The INT SG output level can be varied using the
	playback level adjustment controls.
750	For selecting the signal to be output to analog
	output CH1.
ANA CH1	0000	CH1
SEL
	The CH1 signal is output
	0001	CH5
	The CH5 signal is output
751	For selecting the signal to be output to analog
	output CH2.
ANA CH2
SEL	0000	CH2
	The CH2 signal is output.
	0001	CH6
	The CH6 signal is output
752	For selecting the signal to be output to analog
	output CH3.
ANA CH3	0000	CH3
SEL
	The CH3 signal is output
	0001	CH7
	The CH7 signal is output
753	For selecting the signal to be output to analog
	output CH4.
ANA CH4	0000	CH4
SEL
	The CH4 signal is output
	0001	CH8
	The CH8 signal is output

754For selecting the audio CH1 signal to be superimposed onto the SD SDI output.

SD SDI CH1	0000	CH1
SL
	The CH1 signal is output.
	0001	CH2
	The CH2 signal is output.
	0002	CH3
	The CH3 signal is output.
	0003	CH4
	The CH4 signal is output.
	0004	CH5
	The CH5 signal is output.
	0005	CH6
	The CH6 signal is output.
	0006	CH7
	The CH7 signal is output.
	0007	CH8

The CH8 signal is output.

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

The underlining (__) denotes the factory setting mode.

107