Panasonic AJ-HD1800P <CUE> (continued) Search operations

Function menus (continued)

<CUE> (continued) Search operations

Turn the ADJUST dial to highlight the desired registered point.

When the PREROLL button is pressed, the preroll operation is initiated. The tape will not be prerolled if no cue points have been registered.

Since the tape is not prerolled even if the PREROLL button is pressed when the cue point registration mode is established, be absolutely sure to check that the search mode is established.

[The time selected by the <CUE SHIFT> menu F5 (CU- ROL) setting, which is different from the normal preroll time, takes effect as the preroll time in this mode.]

Function button/	Switching	Setting	Corresponding setup menu	Description of setting
item	method		item
F1	Press	___	___	For multi-cue page forward scrolling.
PREV
F2	Press	___	___	For multi-cue page forward scrolling.
NEXT
F3	Toggle	SEARCH	___	For selecting the search or cue point
MODE		ENTRY		registration mode.
F4		___	___	For clearing the currently selected cue data.
CLR	Press			ENTRY must be selected as the				(MODE)
							F3
				setting.
F5		___	___	When MANU is selected by				+
						SHIFT				F3
AL CLR				(PAGE): All the cue data on the currently
	FiPress			displayed page is cleared.
				When AUTO is selected by	SHIFT			+	F3
				(PAGE): All the cue data on all the pages							is
				cleared.
F6	___	___	___	___
___
F1 (SHIFT)	___	___	___	___
___
F2 (SHIFT)	FiPress	___	___	For calling the MULTI CUE file operation menu.
CARD
F3 (SHIFT)	Toggle	MANU	No. 131	Refer to the setup menu.
PAGE		AUTO	PAGE MODE
F4 (SHIFT)	Toggle	OFF	No. 132	Refer to the setup menu.
ROTATE		ON	ROTA MODE
F5 (SHIFT)	Toggle i ADJ	0s --- 5s --- 15s	No. 011	Refer to the setup menu.
CU-ROL			CU-ROLL TIME
F6(SHIFT)	___	___	___	___
___

The underlining (__) denotes the factory setting mode.

56