Setup menus (continued)

<Menu management accompanying switching the system frequency>

The system menu and setup menu have some items whose settings differ and other items with which no selection options are displayed and whose settings are fixed, depending on the switching of the operation mode in response to the setting selected for system menu item No.25 (SYSTEM FREQ). (Refer to the table below.)

System menu and setup menu settings

zEach of the items whose settings differ is saved in the VTR MEMORY (current file and one of the backup files 1 to 4). The settings that correspond to each operation mode will be displayed so that the settings can be performed for each operation mode.

Registration of the <PF1> and <PF2> function buttons

zWhen the items whose settings differ have been registered in the <PF1> and <PF2> function buttons, the settings that correspond to each operation mode will be displayed so that the settings can be performed for each operation mode.

zIf items, whose selection options are not displayed due to the operation mode, have been registered in the <PF1> or <PF2> function button, when an operation mode in which these options are not displayed is selected, what has been registered is saved but the function button itself will become blank and cannot be operated. Note that the registered contents on items that are not displayed will be deleted during the following operations.

z When the set value in Setup Menu No. 600 (VIDEO IN SEL) changes from SD SDI to another set value or from another set value to SD SDI.

z When the set value in Setup Menu No. 650 (STYLE) changes.

<50P IN/OUT> 50-pin connector registration

zWhen the items whose settings differ have been registered in the <50P IN/OUT> 50-pin connector pins, the settings corresponding to the operation modes are allocated to the IN and OUT pins on the basis of the setting numbers. However, when the upper limit value is exceeded, the value will be limited to this upper limit.

What has been registered is saved, but bear in mind that when the data is registered again, it is saved by overwriting the existing data so that the previously registered data will be lost.

zIf items, whose selection options are not displayed due to the operation mode, have been registered in the <50P IN/ OUT> 50-pin connector, when an operation mode in which these options are not displayed is selected, what has been registered is saved but no operation is possible. Note that the registered contents on items that are not displayed will be deleted during the following operations.

z When the set value in Setup Menu No. 600 (VIDEO IN SEL) changes from SD SDI to another set value, or from another set value to SD SDI,

z When the set value in Setup Menu No. 650 (STYLE) changes.

<Menus which are displayed>

The menus displayed differ depending on the setting selected for menu item No.25 SYSTEM FREQ.

NO.

Menu item

 

 

System menu No.25 (SYSTEM FREQ)

 

 

 

 

 

 

 

 

 

 

 

 

 

59/60

23/24

 

50i/25P

25 (HD)

25 (SD)

 

50 (HD)

50 (SD)

 

 

 

 

 

 

 

 

 

 

 

05

ENCODER SEL

 

 

 

 

 

 

 

 

 

06

V LEVEL CTRL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

SYS H (HD)

 

 

 

 

 

 

 

 

 

14

SYS SC (SD)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

VO SYS H (SD)

 

 

 

 

 

 

 

 

 

16

SD SYS H (SD)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

SCH (SD)

 

 

 

 

 

 

 

 

 

20

AV PHASE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

SYSTEM FREQ

 

 

 

 

 

 

 

 

 

26

HD SYS H ADV

 

No

 

No

No

No

 

No

No

 

 

 

 

 

 

 

 

 

 

 

30

MENU LOCK

 

 

 

 

 

 

 

 

 

000

P-ROLL TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

001

LOCAL ENA

 

 

 

 

 

 

 

 

 

002

TAPE TIMER

 

No

 

 

No

No

 

No

No

 

 

 

 

 

 

 

 

 

 

 

003

REMAIN SEL

 

 

 

 

 

 

 

 

 

004

SYNCRONIZE

 

No

 

 

No

No

 

No

No

 

 

 

 

 

 

 

 

 

 

 

005

SUPER

 

 

 

 

 

 

 

 

 

006

DISPLAY SEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

007

CHARA H-POS

 

 

 

 

 

 

 

 

 

008

CHARA V-POS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

009

CHARA TYPE

 

 

 

 

 

 

 

 

 

010

MONI CONTROL

 

No

 

 

No

No

 

No

No

 

 

 

 

 

 

 

 

 

 

 

011

CU-ROLL TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

113