Panasonic AJ-HD1800P <Notes, <HOME> (continued), In the 59.94 Hz/60 Hz or 50 Hz mode, Playback reference signal specifications for tape playback

Function menus (continued)

<HOME> (continued)

Playback reference signal specifications for tape playback

During tape playback, the video output reference signals are as shown in the table below.

In the 59.94 Hz/60 Hz or 50 Hz mode

Input signals				Menu item No.031
REF_IN	INPUT	AUTO	INPUT*1	HD_REF	SD_REF	E-AUTO
		HD_REF_IN	INPUT	HD_REF_IN	Internal SD	HD_REF_IN
	Input	Complies with	Complies with	Complies with	59.94Hz	Complies with
		HD_REF_IN	INPUT	HD_REF_IN		HD_REF_IN
HD_REF_IN		frequency	frequency	frequency		frequency
		HD_REF_IN	Internal HD	HD_REF_IN	Internal SD	HD_REF_IN
	Not input	Complies with	Complies with	Complies with	59.94Hz	Complies with
		HD_REF_IN	menu item No.030	HD_REF_IN		HD_REF_IN
		frequency	frequency	frequency		frequency
		SD_REF_IN	INPUT	Internal HD	SD_REF_IN	SD_REF_IN
	Input		Complies with	Complies with
		59.94Hz	INPUT	menu item No.030	59.94Hz	59.94Hz
SD_REF_IN			frequency	frequency
		SD_REF_IN	Internal HD	Internal HD	SD_REF_IN	SD_REF_IN
	Not input		Complies with	Complies with
		59.94Hz	menu item No.030	menu item No.030	59.94Hz	59.94Hz
			frequency	frequency
		INPUT	INPUT	Internal HD	Internal SD	INPUT
	Input	Complies with	Complies with	Complies with		Complies with
		INPUT	INPUT	menu item No.030	59.94Hz	INPUT
None		frequency	frequency	frequency		frequency
		Internal HD	Internal HD	Internal HD	Internal SD	Internal HD
	Not input	Complies with	Complies with	Complies with		Complies with
		menu item No.030	menu item No.030	menu item No.030	59.94Hz	menu item No.030
		frequency	frequency	frequency		frequency

*1 If “1394” or “INT SG (internal standard signal)” is selected for the video input signal, the video output reference signal will always be “Internal HD.”

<Notes>

zWhen [E-AUTO] is selected in MENU No. 031 (OUT REF), the system operates when [INPUT] is selected in edit mode or when [AUTO] is selected in any mode other than edit mode.

zWhen using the SD > HD up-converter and HD > HD cross-converter, input the HD tri-level sync signal that supports the HD output format in order to initiate operation using HD_REF_IN.

zDuring SD tape playback, operation is not possible in the 60 Hz mode.

zWhen the HD SDI output signals are output at 60 Hz/24 Hz, the SD SDI signal is output in the NO SYNC status, and the analog composite signals are output in black-and-white mode (burst OFF).

zAll the HD SDI output, SD SDI output, analog composite output, analog component output, audio output and TC output signals are output in phase with the REF input.

45