Panasonic AJ-HD1800P Settings, SETUP menu, (continued), SYSTEM menu, Monitor display menu, <SETUP MENU/SYSTEM MENU

Function menus (continued)

<SETUP MENU/SYSTEM MENU>

When the SETUP MENU or SYSTEM MENU opera-tion menu is selected, a menu list appears on the monitor, and the respective items can be set.

SETUP menu

Change mark

SHIFT F1 F2 F3 F4 F5 F6

SYSTEM menu

Change mark

SHIFT F1 F2 F3 F4 F5 F6

Monitor display menu

Item selection cursor

Item number

Category

Setting number

Setting

Item name

Item number

Settings

1 Selecting the menu items

Select the menu item by turning the ADJ dial. (The cursor is moved down when the dial is turned clockwise and up when it is turned counter-clockwise.)

zForward or reverse page scrolling (SETUP menu only) The menu list is organized by category, and the pages can be scrolled in the forward or reverse direction on a

category by category basis.

F1 (: PREV) / F2 (; NEXT)

<Note>

The screen may continue to scroll for a few moments after the ADJ dial has been turned.

2 Changing the settings

1.In the menu item selection status, press the ADJ dial. At this time, the setting of the menu item indicated by the menu item selection cursor blinks on the monitor

2.Turn the ADJ dial to select the setting. (Turn it clockwise to move up through the settings and counterclockwise to move down through the settings.) When the ADJ dial is pressed again, the menu item selection status is restored.

<Notes>

zSetting items which have submenus

A submenu is opened by pressing the SHIFT but- ton. The same operations as the ones described above are then used to change the settings.

zCanceling individual items

When F3 (CANCEL) is pressed, the setting opera- tion is canceled, and the item selection status is restored.

3 Entering settings (After a setting has been entered,

the menu operation is forcibly exited.)

Press F5 (SET) to enter a setting.

4 Exiting the menu operation

When the F6 (EXIT) button is pressed in the menu item selection status, the menu operation is exited, and the original operation screen is restored.

However, if the F6 (EXIT) button is pressed after a setting has been changed without that setting having been entered, a confirmation message will be displayed.

Confirmation message

	Confirmation item	Description of setting

	EXIT confirmation	EXIT?

	When an attempt has been made to exit
	When an attempt has been made to exit	F3:CANCEL
	the menu operation after a setting has	F5:SET(and EXIT)
	been changed without that setting	F5:SET(and EXIT)
	been changed without that setting	F6:EXIT(without SET)
	having been entered	F6:EXIT(without SET)
	having been entered

<Note>

The “!” mark appears at the bottom left of the screen when a setting has been changed.