Function menus (continued)

<HOME>

The most basic settings for recording, playback and TC operations are set on this menu screen.

Warning mark

Status display 2

Name of menu displayed Remaining tape/total tape

Operation mode/speed

F i press*:

When a function button is pressed while the F button is held down, the setting can be changed while the button is held down or at the instant when it is pressed. When the function button is released, the original setting is restored.

*When only the function button is pressed, message display “Press F + F5 ” etc. blinks.

Function button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

to

F6

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These

buttons control the functions displayed in the

SHIFT

 

 

 

F1

 

 

 

F2

 

 

 

F3

 

 

 

F4

 

 

 

F5

 

 

F6

 

 

Function Menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

Time counter

 

 

 

 

 

 

 

 

 

 

Back page

 

 

 

 

 

 

 

 

 

 

<Note>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

menu

 

Cue time

 

 

 

 

 

 

Changes in the settings made with the function buttons

 

 

 

 

indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

that control the Setup Menu are reflected in the system

 

 

 

 

Status display 1

 

 

 

 

 

 

 

 

 

 

 

 

 

immediately, but about 5 seconds is required to store the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

settings. To turn off the power after changing the settings,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

wait about 5 seconds or more and then turn off the power.

Status display3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHIFT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This button shifts the display alternately between the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

current function menu and the back page menu.

SHIFT F1 F2 F3 F4 F5 F6

How to switch the settingsToggle:

Each time a function button is pressed, the setting is changed or entered.

F i toggle*:

When a function button is pressed while the F button is held down, the setting can be changed or entered each time.

Toggle i ADJ:

When a function button is pressed, the setting is highlighted, and the status in which the setting can be changed is established.

The ADJUST dial is used to change the setting.

When the same function button is pressed again and the highlighting is released, the setting is entered.

Press:

When a function button is pressed, the setting can be changed while the button is held down or at the instant when it is pressed. When the function button is released, the original setting is restored.

Back Page Menu Indicator

;: This is displayed when the front page menu is displayed.

:: This is displayed when the back page menu is displayed.

Function button operation inhibited indicator

This is displayed when the BS button is pressed while the

Fbutton is held down. When it appears, the operation of the function buttons can be inhibited. When the button is

pressed again while the F button is held down, the display is cleared, and it becomes possible to operate the function buttons.

Warning symbol

When a warning occurs on the unit, the warning symbol (W) blinks. (For details, refer to the Function Menu <DIAG> on page 57.)

40