Automatic Editing (deck-to-deck) (continued)

Previewing

1 After the edit points have been registered, press the PREVIEW button.

Regular preview is now conducted.

<Notes>

zIf the edit IN point has not been registered, the position where the PREVIEW button was pressed is registered as the edit IN point.

zTo stop the preview at any time, press the STOP but- ton.

zWhen the PREVIEW button is pressed again after the IN point during the course of a preview, the preview will start again from the beginning.

zWhen the edit OUT point is reached, the tape is pos- trolled, after which it stops automatically.

<Note>

The registered points are automatically cleared after editing has been executed. However, the previous edit points can be recalled by pressing the TRIMi (or TRIMj) button and SET button at the same time.

1

Reviewing

1 Upon completion of the editing, press the REVIEW button.

Review is now started by the recorder.

zTo stop the review at any time, press the STOP button.

zWhen the edit OUT point is reached, the tape is postrolled, after which it stops.

1

Automatic editing

1 Press the AUTO EDIT button. Automatic editing is now executed.

z To suspend editing at any time, press the STOP button.

zWhen the edit OUT point is reached, the tape is

postrolled, after which it stops.

1

Postrolling

In the case of assemble editing, editing continues for about 2 seconds after the edit OUT point is passed, and the tape is then returned to the OUT point, after which it stops.

In the case of insert editing, the PLAY mode is established after the edit OUT point has been passed, and the tape is then returned to the OUT point, after which it stops.

Retry function

Even when the STOP button has been pressed to suspend editing, editing can be repeated from the beginning simply by pressing the AUTO EDIT button again.

Auto tag function

If, upon completion of editing, when the AUTO EDIT button is pressed although the next edit point has not yet been registered, the previous edit OUT point is registered as the IN point, and editing is executed.

To release the auto tag mode, press one of the transport system buttons (such as the PLAY button).

33