Function menus (continued)
Turn the ADJUST dial to highlight the point which is to be registered. When the SET button is pressed, the current
tape position is registered as the cue point. The following applies depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
Operations are performed on the selected page. Press the SET button to register the points in succession (CUE¢1 > CUE¢2 > ... > CUE¢6) on the selected page. (Any points already registered will be overwrit- ten.)
The registration is automatically terminated when CUE¢6 is registered on the page. (*1)
A change must be made to the points to be registered if more cue points are to be registered. Check that the cue point registration mode is established, change the page, and change the points to be registered. In this case, the search point will also move automatically to the top (CUE¢1) of the changed page.
*1 If “ON” is selected as the F4 (ROTATE) setting on the <CUE SHIFT> menu, the registration of the cue points will rotate on the same page in the following order: CUE¢1 > CUE¢2 > ... > CUE¢6 > CUE¢1 > CUE¢2 > ...
When “AUTO” is set:
When a page become full during the cue point registration process, operation automatically moves to the next page, and registration continues. When CUE96 on the last page is reached, registration is automatically termi- nated. (*2)
A change must be made to the points to be registered if more cue points are to be registered. Check that the cue point registration mode is established, change the page, and change the points to be registered. In this case, the search point will not be changed.
*2 If “ON” is selected as the F4 (ROTATE) setting on the <CUE SHIFT> menu, the registration of the cue points will rotate from page 9 (CUE96) to page 0 (CUE01).
1.Turn the ADJUST dial to highlight the desired registered point display area
2. Press the T button twice. Only the “10’s” hour digit of the selected cue point is now highlighted, and the change enable status is established.
<Note>
When “REV” has been selected as the setup menu item No.144 (TC INPUT) setting, the input of the number will start from the
3.Input the number using the number keys. Movement from one digit to the next is done automatically after one number has been input. The desired digit can also be selected by turning the ADJUST dial.
4.To enter the number, press the ENT button.
When the display screen is switched or when the C button is pressed during the input process, the change enable status is released, and the setting is canceled.
Clearing registered pointsClearing all the registered points togetherWhen F5 (AL CLR) on the <CUE> menu is pressed while the F button is held down, all the cue point data currently selected is cleared. The range of the points which are cleared is as follows depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
All the points on the currently selected page are cleared.
When “AUTO” is set:
All the points on all the pages are cleared.
After clearing, the search and registered points appear as follows depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
A return is made to the top (CUE¢1) of the page concerned
When “AUTO” is set:
A return is made automatically to the top (CUE01) of the first page.
*Points are cleared whether “ENTRY” (cue point registration mode) or “SEARCH” (search mode) is
selected as the setting for F3 (MODE) on the <CUE> menu.
Clearing individual registered pointsWhen the F4 (CLR) button on the <CUE> menu is pressed, the currently selected cue point data is cleared.
* The point is cleared only when “ENTRY” (cue point registration mode) is selected as the setting for F3 (MODE) on the <CUE> menu.
55