Setup menus (continued)
No./Item |
| Description of setting | |
300 | For selecting the operation to be performed | ||
| when an edit point has been set incorrectly | ||
IN/OUT DEL | (when the OUT point comes before the IN | ||
| point). | ||
| 0000 | MANU | |
| Editing is not performed unless the illegal edit | ||
| point is cleared or set properly. | ||
| 0001 | AUTO | |
| The edit point which had already been input is | ||
| cleared automatically. | ||
|
| ||
301 | For selecting whether to show a negative | ||
| display (time code display area) when the IN | ||
NEGA FLASH | point is greater than the OUT point. | ||
| 0000 | OFF | |
| A negative display is not shown. | ||
| 0001 | ON | |
| A negative display is shown. | ||
|
| ||
302*1 | For selecting whether to perform simultaneous | ||
| playback during editing. | ||
CONFI EDIT | 0000 | OFF | |
| |||
| Simultaneous playback is not performed. | ||
| 0001 | ON | |
| Simultaneous playback is performed. | ||
| <Note> | ||
| Regardless of the settings in Setup Menu No. 140 | ||
| (OUTPUT), simultaneous playback is always | ||
| performed during editing. | ||
|
| ||
303*1 | For selecting how to connect the digital audio | ||
| edit IN points. | ||
AUD EDIT | 0000 | CUT | |
IN | |||
Cut processing | |||
| |||
| 0001 | FADE | |
| |||
|
| ||
304*1 | For selecting how to connect the digital audio | ||
| edit OUT points. | ||
AUD EDIT OUT | 0000 | CUT | |
| |||
| Cut processing | ||
| 0001 | FADE | |
| |||
|
| ||
305 | For selecting whether to register the IN points | ||
| using the PREROLL button in cases where the | ||
AUTO ENTRY | IN points have not been registered. | ||
| 0000 | DIS | |
| The IN points are not registered. | ||
| 0001 | ENA | |
| The IN points are registered | ||
|
| ||
306*1 | For selecting the deck whose the color framing | ||
| is to be adjusted during | ||
CF ADJ SEL | 0000 | PLAYER | |
The player’s IN and OUT points are adjusted | |||
| |||
| (using the recorder as the reference). | ||
| 0001 | RECORD | |
| The recorder’s IN and OUT points are adjusted | ||
| (using the player as the reference). | ||
307For selecting the VTR’s mode upon completion of the
AFTER | 0000 | STOP |
| The VTR is set to the STOP mode. | |
| 0001 | STILL |
The VTR is set to the still picture (SHTL STILL) mode.
0002 STILL2
The VTR is set to the still picture (SLOW STILL) mode.
No./Item |
| Description of setting |
|
| |
308 | For setting the maximum speed of SLOW FWD. | |
VAR FWD MAX | 0000 | +4.9 |
| i4.9 times normal tape speed | |
| 0001 | +2 |
| i2 times normal tape speed (i1.85 times | |
| normal tape speed for formats other than | |
| DVCPRO | |
| 0002 | +1 |
| i1 times normal tape speed | |
| <Notes> |
|
| z At any setting other than 0 (i4.9), phase | |
| adjustments cannot be conducted from the | |
| editing controller. | |
| z Depending on the format used, the actual tape | |
| running speed differs slightly from what is | |
| indicated by the superimposed display. | |
|
| |
309 | For setting the maximum speed of SLOW REV. | |
VAR REV MAX | 0000 | |
| j4.9 times normal tape speed | |
| 0001 | |
| j2 times normal tape speed (j1.85 times | |
| normal tape speed for formats other than | |
| DVCPRO | |
| 0002 | |
| j1 times normal tape speed | |
| <Note> |
|
| Depending on the format used, the actual tape | |
| running speed differs slightly from what is indicated | |
| by the superimposed display. | |
|
| |
310 | For setting the maximum speed of JOG FWD. | |
JOG FWD | 0000 | +4.9 |
MAX | i4.9 times normal tape speed | |
| 0001 | +2 |
| i2 times normal tape speed (i1.85 times | |
| normal tape speed for formats other than | |
| DVCPRO | |
| 0002 | +1 |
| i1 times normal tape speed | |
| <Note> |
|
| At any setting other than 0 (i4.9), phase | |
| adjustments cannot be conducted from the editing | |
| controller which performs these adjustments by the | |
| JOG command. | |
|
| |
311 | For setting the maximum speed of JOG REV. | |
JOG REV MAX | 0000 | |
| j4.9 times normal tape speed | |
| 0001 | |
| j2 times normal tape speed (j1.85 times | |
| normal tape speed for formats other than | |
| DVCPRO | |
| 0002 | |
| j1 times normal tape speed | |
|
| |
312*1 | For setting the postroll time. | |
| Any time from 0 to 5 seconds can be set in 1- | |
POSTROLL | second increments. | |
|
| |
TM | 0000 | 0s |
| ||
| 0001 | 1s |
| 0002 | 2s |
| 0003 | 3s |
| 0004 | 4s |
| 0005 | 5s |
|
|
|
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
91