Function menus

The function menus are used to set the functions which are frequently used.

The function menus are selected directly using the direct menu buttons on the front panel.

General descriptionGeneral menus<HOME>, <HOME SHIFT>

The most basic settings for recording, playback and TC operations are set on these menu screens.

<VIDEO>, <VIDEO SHIFT>

The basic input/output settings for the video signals are performed and, moreover, the level of the HD output signals can also be adjusted on these menu screens.

Special menus<<SYSTEM MENU>>

The SYSTEM menu is displayed on-screen, enabling various adjustments to be made.

<<SETUP MENU>>

The SETUP menu is displayed on-screen, enabling various adjustments to be made.

<AUDIO>, <AUDIO SHIFT1>, <AUDIO SHIFT2>

The basic input/output settings for the audio signals are performed on these menu screens.

<TC>, <TC SHIFT>

The TC-related settings are performed on these menu screens.

The settings for superimposing time codes on the display can also be performed on these menu screens.

<PF1 FT>, <PF1 BK>, <PF2 FT>, <PF2 BK>

Up to 24 frequently used menu items which have been registered can be used on these menu screens.

<CUE>, <CUE SHIFT>

A maximum of 60 cue points can be set on these menu screens. In the PAGE mode, 10 pages with 6 cue points on each page are provided so that the cue points can be managed on a page-by-page basis.

<<FILE>>

The current setting information, including the SETUP menu contents, can be provided with titles and either saved in or loaded from the backup memory in one of 4 variations.

<<PF1 FT ASSIGN>>, <<PF1 BK ASSIGN>> <<PF2 FT ASSIGN>>, <<PF2 BK ASSIGN>>

The SETUP menu items which can be registered are displayed on-screen, and they can be registered into or deleted from the function buttons.

<<IC CARD/MENU>>

Up to eight kinds of current settings, including the contents of the SETUP menu with titles, can be stored or retrieved from an SD memory card.

<<IC CARD/ERR LOG>>

Up to eight kinds of the error logs with titles can be stored or retrieved from an SD memory card.

<DIAG>, <DIAG SHIFT>

Information such as Warnings/Hour meter/UMID can be confirmed.

On the SHIFT window, error log files can be confirmed, deleted, and stored or retrieved from an SD memory card.

<MENU>, <MENU SHIFT>

It is possible to move the operation (adjusting, storing, or retrieving from internal memory and an SD memory card) window related to the SYSTEM and the SETUP menu.

<<IC CARD/MULT CUE>>

Up to eight kinds of MULTI CUE menus with titles can be stored or retrieved from an SD memory card.

<<50P IN ASSIGN>>, <<50P OUT ASSIGN>>

Using the front panel controls and on-screen menus, the functions are registered into the input pins of the parallel remote (50PIN) connector and the statuses are registered into its output pins.

<ASSEMBLE>

The ASSEMBLE editing mode is selected on this menu screen.

<INSERT>

The INSERT editing mode and editing channels are selected on this menu screen.

38