Setup menus
No./Item |
| Description of setting | |
|
| ||
000 | For setting the preroll time. Any time from 0 to | ||
30 seconds can be set in | |||
0000 | 0s | ||
| : | : | |
| 0005 | 5s | |
| : | : | |
| 0030 | 30s | |
| <Notes> | ||
| z During automatic editing (PREVIEW or AUTO | ||
| EDIT), no operations are performed if the preroll | ||
| time is set to 0 seconds. | ||
| z If the phases are to be synchronized between | ||
| two decks for editing as per the setup menu item | ||
| No.004 (SYNCHRONIZE) setting, set the preroll | ||
| time to at least 2 seconds. | ||
|
| ||
001 | For selecting the transport system buttons | ||
| which can be operated on the front panel in the | ||
LOCAL ENA | REMOTE mode. | ||
| 0000 | DIS | |
| No buttons can be operated. | ||
| 0001 | ST&EJ | |
| Only the STOP and EJECT buttons can be oper- | ||
| ated. | ||
| 0002 | ENA | |
| ll the buttons except for the RECORDER and | ||
| PLAYER buttons can be operated. | ||
| <Note> | ||
| The following buttons and dials function at all | ||
| times regardless of this setting: | ||
| Audio input/output level control dials, audio | ||
| channel selector buttons, number keys, function | ||
| buttons, direct menu button, ASSEM button, | ||
| INSERT button, ADJ dial, headphone volume | ||
| control dial, MONITOR SELECT button, METER | ||
| (FULL/FINE) selector switch, REMOTE button. | ||
|
| ||
002*1 | For selecting the 12- or | ||
| CTL counter display. | ||
TAPE TIMER | 0000 | ±12h | |
| |||
| 0001 | 24h | |
| |||
|
| ||
003 | For selecting whether or not to display REMAIN | ||
REMAIN SEL | (remaining tape time) on the superimposed | ||
display of the HD SDI MONITOR, SD SDI | |||
| MONITOR and VIDEO OUT3 connectors. | ||
| 0000 | OFF | |
| The remaining tape time is not displayed. | ||
| 0001 | 2L | |
| The remaining tape time is displayed on the sec- | ||
| ond line. | ||
| 0002 | 1L | |
| The remaining tape time is displayed on the first | ||
| line. |
| |
| 0003 | R/TTL | |
The remaining tape time is displayed on the first line, and the total tape time is displayed on the second line.
<Notes>
zWhen setting 1 (2L) has been selected, the remaining tape time is not displayed if 0 (TIME) is selected as the setup menu item No.006 (DISPLAY SEL) setting.
zWhen setting 3 (R/TTL) has been selected, the remaining tape time is not displayed if 0 (TIME) is selected as the setup menu item No.006 (DISPLAY SEL) setting.
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*The underlining (__) denotes the factory setting mode.
No./Item |
| Description of setting |
|
| |
004*1 | For setting whether or not to synchronize the | |
| phases between two decks. | |
SYNCHRONIZE | 0000 | OFF |
| The phases are not synchronized. The edit | |
| points will be off by several frames but editing will | |
| be commenced more promptly. | |
| 0001 | ON |
| The phases are synchronized. | |
| can be performed. | |
|
| |
005 | For selecting whether or not to superimpose | |
| the display of the time code or other data onto | |
SUPER | the HD SDI MONITOR, SD SDI MONITOR and | |
| VIDEO OUT3 connectors. | |
| 0000 | OFF |
| The time code or other data is not displayed. | |
| 0001 | ON |
| The time code or other data is displayed. | |
| <Note> |
|
| z The 1394 output follows the settings in Setup | |
| Menu No. 899 (DIF SUPER). | |
| z When the 23/24 Hz mode, 25 Hz (HD) mode, or | |
| 50 Hz (HD) mode is selected in System Menu | |
| No. 25 (SYSTEM FREQ), supers, such as time | |
| codes, are not displayed on the SD SDI | |
| MONITOR/VIDEO OUT 3 connector. When the | |
| 25 Hz (SD) mode or 50 Hz (SD) mode is | |
| selected, supers, such as time codes, are not | |
| displayed on the HD SDI MONITOR connector. | |
006For selecting the time code and other displays to be superimposed onto the HD SDI MONITOR,
DISPLAY SEL SD SDI MONITOR and VIDEO OUT3 connectors. In the following descriptions, [DATA] refers to the
values for CTL/TC/UB selected in F3 (TC/CTL).
0000 TIME
Only data are displayed.
0001 T&STA
Data and operating conditions are displayed.
0002 T&S&M
Data, operating conditions, and the mode are displayed
0003 T&RT
Data and REC TIME are displayed.
0004 T&YMD
Data and REC DATE (Year/Month/Day) are displayed.
0005 T&MDY
Data and REC DATE (Month/ Day/Year) are displayed.
0006 T&DMY
Data and REC DATE (Day/Month/Year) are displayed.
0007 T&UB
Data and user bits are displayed.
However, when UB is selected in F3 (TC/CTL) of the HOME menu, the time code is displayed immediately after user bits.
0008 T&CTL
Data and CTL are displayed.
However, when CTL is selected in F3 (TC/CTL) of the HOME menu, the time code is displayed immediately after CTL data.
0009 T&T
Data and the time code are displayed.
<Notes>
zWhen setting 2 (T&S&M) is selected, an error message appears if a warning or error has occurred.
zREC TIME and REC DATE are displayed only during DV or DVCAM format playback. The operation mode is displayed when the DVCPRO
83