Setup menus (continued)
<BASIC> (continued)
No./Item |
| Description of setting | |
|
| ||
|
| ||
022 | For selecting the format in which the tape is to | ||
| be played back. | ||
PB FORMAT | 0000 | MANU | |
| |||
| The format is determined by the setting selected | ||
| for setup menu item No.023 (FORMAT SEL). | ||
| 0001 | AUTO1 | |
| The unit follows the format recorded on the tape. | ||
| Whenever the format is changed during | ||
| playback, the playback format switches to others | ||
| according to the changed format. | ||
| 0001 | AUTO2 | |
| If the playback format does not change for 1 | ||
| second or more after the SERVO lamp lights | ||
| when starting playback, the current playback | ||
| format is fixed. The fixed playback format is | ||
| retained as is even if the format recorded on the | ||
| tape is changed unless the playback mode is | ||
| released. | ||
|
| ||
023 | For selecting the format when “MANUAL” has | ||
| been selected as the setup menu item No.022 | ||
FORMAT | (PB FORMAT) setting. | ||
SEL | If “AUTO” is selected as the setting, the format | ||
| when playback starts is selected, and when the | ||
| tape is played back, the format is automatically | ||
| detected and matched with the format of the | ||
| playback tape. | ||
| 0000 | ||
| The DVCPRO | ||
| setup menu item No.020 (SYS FORMAT) setting | ||
| is followed. | ||
| 0001 | ||
| The DVCPRO HD format is selected, and the | ||
| setup menu item No.020 (SYS FORMAT) setting | ||
| is followed. | ||
| 0002 | 422 | |
| The DVCPRO50 (422) format is selected. | ||
| 0003 | 411 | |
| The DVCPRO (411) format is selected. | ||
| 0005 | DV | |
| The DV format is selected. | ||
| 0006 | DVCAM | |
| The DVCAM format is selected. | ||
|
| ||
030*1 | For setting the field system frequency | ||
HD | 0000 | 59/23 | |
The 59.94/23.98 Hz frequency is set. | |||
FREQUENCY | |||
0001 | 60/24 | ||
| |||
The 60/24 Hz frequency is set.
<Notes>
zThe set field frequency is enabled only when there is no input for the OUT REF settings. If there are any corresponding inputs, the field frequency coincides with the field frequency of the input.
zWhen the HD SDI output is output with 60 Hz/24 Hz, the SD SDI is output as NO SYNC, and the analog composite is output in the White/Black mode (burst off).
No./Item |
| Description of setting | |
|
| ||
031*2 | Video output reference | ||
OUT REF | 0000 | AUTO | |
When the HD REF input signal is supplied, it is | |||
| |||
| used as the reference. If it is not supplied but the | ||
| SD REF input signal is supplied, the SD REF | ||
| signal serves as the reference instead. | ||
| If neither the HD REF nor SD REF input signal is | ||
| supplied, the HD serial signal serves as the | ||
| reference. | ||
| If none of the HD REF, SD REF and HD serial | ||
| signals are supplied, the internal sync signal | ||
| serves as the reference. | ||
| 0001 | INPUT | |
| When the serial input signal is supplied, it is used | ||
| as the reference. | ||
| 0002 | HD_REF | |
| The signal which is input to the HD REF IN | ||
| connector is used as the reference. | ||
| 0003 | SD_REF | |
| The signal which is input to the SD REF IN | ||
| connector is used as the reference. | ||
| 0004 | ||
| In edit mode, the state is the same as set in | ||
| [INPUT]. In modes other than edit mode, the | ||
| state is the same as set in [AUTO]. | ||
| <Note> | ||
| For details, refer to [Playback reference signal | ||
| |||
|
|
| |
*1: When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*2: When the 23/24 Hz mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*The underlining (__) denotes the factory setting mode.
85