Setup menus (continued)
<VIDEO>
No./Item |
| Description of setting | |
|
| ||
600*1 | For selecting the video signal which is to be | ||
| input. | ||
VIDEO IN SEL | 0000 | INT SG | |
| |||
| The internal signal selected by the VIDEO INT | ||
| SG item is generated. | ||
| 0001 | HDSDI | |
| The serial video signal which has been input to | ||
| the HD SDI IN connector is selected. | ||
| 0003 | 1394 | |
| For selecting the compressed digital signals | ||
| input to the DV connector (digital video | ||
| interface). In this case, the audio input signals | ||
| are also signals from the DV connector. | ||
| 0004 | SD SDI | |
| For selecting the serial image signals input to the | ||
| SD SDI IN connector | ||
|
| ||
601*1 | For selecting the type of internal signal. | ||
VIDEO INT SG | 0000 | 100%CB | |
| A 100% color bar signal is selected. | ||
| 0001 | 75%CB | |
| A 75% color bar signal is selected. | ||
| 0002 | SMPTE | |
| An SMPTE color bar signal is selected. | ||
| 0003 | ARIB | |
| An ARIB color bar signal is selected. | ||
| 0004 | MB | |
| A multiburst signal is selected. | ||
| 0005 | RAMP | |
| A ramp signal is selected. | ||
| 0006 | BLACK | |
| A black signal is selected. | ||
| 0007 | PLL | |
| A PLL signal is selected. | ||
| 0008 | EQ | |
| An EQ signal is selected. | ||
|
| ||
602*1 | For selecting how to process the serial input. | ||
SDI IN MODE | 0000 | DR OFF | |
The 8 higher bits after rounding up the 2 lowest | |||
| |||
| bits are recorded. | ||
| 0001 | DR ON | |
| The signal with 8 higher bits, obtained by | ||
| dynamic rounding, is recorded. | ||
|
| ||
603 | For selecting whether the image input signal is | ||
| muted or not when blank parts of the tape are | ||
detected during playback | |||
| 0000 | N MUTE | |
| The signals are not muted. | ||
| (They are frozen.) | ||
| 0001 | GRAY | |
| The signals are muted with gray. | ||
| 0002 | BLACK | |
| The signals are muted with black. | ||
| 0003 | NOISE | |
| The signals are muted with noise. | ||
|
| ||
604*1 | For selecting the freeze mode of the still | ||
| pictures and slow playback mode. | ||
FREEZE SEL | 0000 | FIELD | |
| |||
| Field freeze, field slow | ||
| 0001 | FRAME | |
| Frame freeze, frame slow | ||
|
|
| |
The underlining (__) denotes the factory setting mode.
No./Item |
| Description of setting | |
605*1 | During field slow playback, vertical | ||
| interpolation is conducted automatically to | ||
INTERPOLATE | minimize the up/down movement of the | ||
| playback pictures. However, this setting | ||
| enables the interpolation operation to be | ||
| forcibly set to OFF. | ||
| 0000 | OFF | |
| The interpolation is forcibly set to OFF | ||
| 0001 | AUTO | |
| During slow playback, the interpolation is auto- | ||
| matically set to ON | ||
|
| ||
606 | For switching the MONITOR output signal from | ||
| SD SDI connector. | ||
SD MONI O | 0000 | MONI | |
SEL | The MONITOR signal is output. | ||
| 0001 | SDI | |
| The same video signal as the one output from | ||
| the SD SDI OUT1 connector is output. | ||
| <Note> | ||
| When 1 (SDI) is selected, the time code and other | ||
| information are not superimposed on the display. | ||
|
| ||
619*4 | This is used to select the method to process the | ||
| images using the vertical filter during down- | ||
V_FILTER | conversion. | ||
0000 | FIELD | ||
| |||
| The images are processed by field basis. | ||
| 0001 | FRAME | |
| The images are processed by frame basis. | ||
| <Note> | ||
| When “FRAME” has been selected, the resolution | ||
| is improved, but the images may flicker. | ||
|
| ||
620*2 | For selecting the picture frame during down- | ||
| conversion. | ||
DOWNCON | 0000 | ||
MODE | Side cut mode | ||
| 0001 | ||
| Letter box mode | ||
| 0002 | ||
| Squeeze mode | ||
| 0003 | 14:9 | |
| Semi letter box 14:9 | ||
| 0004 | 13:9 | |
| Semi letter box 13:9 | ||
|
| ||
621*3 | For selecting the picture frame during up- | ||
| conversion. | ||
UPCON MODE | 0000 | ||
| Side panel mode | ||
| 0001 | ||
| Top and bottom cut in vertical direction | ||
| 0002 | ||
| Stretch mode | ||
622For selecting the horizontal frequency band during
D/C RESP | (1080i <> 720p). | |
H | 0000 | WIDE |
| 0001 | STD |
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*3 When the 25 Hz (HD, SD) mode or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.
*4 This item is displayed only when the 25 Hz (SD) mode is selected in System Menu No. 25 (SYSTEM FREQ)
96