Panasonic AJ-HD1800P <OPERATION, (continued)

Setup menus (continued)

<OPERATION>

No./Item		Description of setting
100	For selecting the direct search dial operation.
SEARCH ENA	0000	DIAL
	Direct search dial operations are performed.
	0001	KEY
	Unless the search button is pressed, the mode
	does not change to the search mode.
101	For selecting the maximum speed of shuttle
	operations.
SHTL MAX	0000	x9.8
	k9.8 times normal speed
	0001	x16
	k16 times normal speed
	0002	x32
	k32 times normal speed
	<Note>
	Depending on the tape format, the actual tape
	running speed differs slightly from what is indicated
	by the superimposed display.
102	For setting the maximum speed of fast forward
	and rewind operations.
FF. REW MAX	0000	x16
	k16 times normal speed
	0001	x32
	k32 times normal speed
	0002	x50
	k50 times normal speed
	0003	x60
	k60 times normal speed
	0004	x100
	k100 times normal speed
	<Note>
	The maximum speed is automatically limited to
	50k for the DVCPRO HD and DVCPRO50 format
	and to 32k for the DV and DVCAM formats.
104	For selecting whether a warning is to be
	displayed when the REF VIDEO signal has not
REF ALARM	been connected.
	0000	OFF
	A warning is not displayed.
	0001	ON
	A warning is displayed by the blinking STOP
	lamp.
105*1	For selecting the VTR mode which is to be set
	to the EE mode when “0 (EE)” is selected as the
AUTO EE SEL	setup menu item No.140 (OUTPUT) setting.
	0000	S/F/R
	The EE mode is established when the VTR is in
	the STOP, FF or REW mode.
	0001	STOP
	The EE mode is established when the VTR is in
	the STOP mode only.

*1: When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

The underlining (__) denotes the factory setting mode.

No./Item			Description of setting
106	For selecting the video and audio output
	statuses in the EJECT mode.
EJECT EE SEL	0000	EE
	The EE mode is always established regardless of
	the setup menu item No.140 (OUTPUT) setting.
	0001 BLACK
	When setup menu item No.140 (OUTPUT) is set
	to:	The EE mode is established.
	“EE”:
	“TAPE”: The BLACK mode is established for the
		video signals, and the audio signals are
		muted.
	0002	GRAY
	When setup menu item No.140 (OUTPUT) is set
	to:	The EE mode is established.
	“EE”:
	“TAPE”: The GRAY mode is established for the
		video signals, and the audio signals are
	<Note>	muted.
	If [EE] is selected when the 23/24 Hz or 25 Hz (HD,
	SD), 50 Hz (HD, SD) mode is selected in System
	Menu No. 25 (SYSTEM FREQ), images are output
	in BLACK and voices are muted.
107*1	For selecting what signals are to be output
	when the EE mode is established.
EE MODE SEL	0000 NORMAL
	Signals delayed by an amount equivalent to the
	time taken for the signals to be processed inter-
	nally are output.
	0001	THRU
	The signals are not processed internally but out-
	put in their original form with no delay.
	<Note>
	When 1394 or INT-SG is selected in the video
	input, the system operates as “NORMAL”
	regardless of the settings in this item.
108	For setting the play startup time in 1-frame
	increments.
PLAY DELAY	0000	0
	:	:
	0015	15
109*1	For selecting the field unit for locking the
	playback framing.
CAP. LOCK	<59/60Hz>		<50Hz>
	0000	2F	0000	2F
	0001	4F	0001	4F
			0002	8F
110	For selecting whether the tape is to be
	automatically wound back to its beginning
AUTO REW	when the tape-end has been detected.
	0000	OFF
	The tape stops when it reaches the tape-end.
	0001	ON
	The tape is rewound to its beginning.

87