Setup menus (continued)

<AUDIO>

(continued)

 

 

 

 

No./Item

 

 

Description of setting

 

 

 

734*1

 

For selecting how to process the audio edit

 

 

points (IN points and OUT points) during

PB FADE

 

playback.

 

 

 

 

 

0000

AUTO

 

 

The status established during recording is fol-

 

 

lowed.

 

 

0001

CUT

 

 

Forcibly cut

 

 

0002

FADE

 

 

Forcibly faded

 

 

 

735

 

For selecting whether to superimpose the audio

 

 

data on the HD SDI output.

HD EMBD AUD

 

0000

OFF

 

 

 

 

The audio data is not superimposed.

 

 

0001

ON

 

 

The audio data is superimposed.

 

 

 

736

 

For selecting whether to superimpose the audio

 

 

data on the SD SDI output.

SD EMBD AUD

 

0000

OFF

 

 

 

 

The audio data is not superimposed.

 

 

0001

ON

 

 

The audio data is superimposed.

 

 

 

737

 

For selecting the mixed signals for the

 

 

headphone monitor (Lch and/or Rch).

MONI MIX

 

0000

OFF

 

 

 

 

Neither the Lch nor Rch signals are mixed.

 

 

0001

L

 

 

Only the Lch signals are mixed.

 

 

0002

R

 

 

Only the Rch signals are mixed

 

 

0003

L/R

 

 

Both the Lch and Rch signals are mixed.

 

 

<Notes>

 

 

z At the OFF setting, the signals to be output to

 

 

monitor L (or monitor R) are switched to CH1,

 

 

CH2, CH3 and so on each time the “L” or “R”

 

 

button is pressed. The selected signals are

 

 

displayed below the audio level meter.

 

 

z At the L, R or L/R setting, the signals of a

 

 

multiple number of channels can be mixed and

 

 

output. When the number key corresponding to

 

 

the channel whose signals are to be monitored is

 

 

pressed while the “L” (or “R”) button is held down,

 

 

that channel is selected. The selected channel is

 

 

displayed below the audio level meter.

 

 

(Alternatively, the same steps can be taken to

 

 

de-select a channel which has already been

 

 

selected.) However, only up to 2 channels

 

 

among the CH1-CH4 channels and up to 2

 

 

channels among the CH5 to CH8 channels can

 

 

be selected.

 

 

 

738

 

For selecting the CH1 output status of the main

 

 

signal line in the search mode.

CH1 CUE SEL

 

 

 

 

 

0000

OFF

 

 

The CUE signal is not output.

 

 

0001

ON

 

 

The CUE signal is output.

 

 

<Note>

 

 

 

For details on the audio output statuses, refer to

 

 

[Audio outputs in the search mode] (page 109).

 

 

 

 

No./Item

 

Description of setting

 

 

739

For selecting the CH2 output status of the main

 

signal line in the search mode.

CH2 CUE

0000

OFF

SEL

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

740

For selecting the CH3 output status of the main

 

signal line in the search mode.

CH3 CUE

0000

OFF

SEL

 

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

741

For selecting the CH4 output status of the main

 

signal line in the search mode.

CH4 CUE

0000

OFF

SEL

 

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

742

For selecting the CH5 output status of the main

 

signal line in the search mode.

CH5 CUE

 

 

SEL

0000

OFF

 

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

743

For selecting the CH6 output status of the main

 

signal line in the search mode.

CH6 CUE

0000

OFF

SEL

 

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

744

For selecting the CH7 output status of the main

 

signal line in the search mode.

CH7 CUE

0000

OFF

SEL

 

The CUE signal is not output.

 

0001

ON

 

The CUE signal is output.

 

<Note>

 

 

For details on the audio output statuses, refer to

 

[Audio outputs in the search mode] (page 109).

 

 

 

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

106