Panasonic AJ-HD1800P <HOME> (continued) Status display

Function menus (continued)

<HOME> (continued) Status display 1

VTR			Description of settings
PB	Playback format	1080i LP	These settings indicate the DVCPRO HD-LP recording and playback mode.
	This displays the format
		720p LP
	used for playback.
		1080i SP	These settings indicate the DVCPRO HD-SP playback mode.
		720p SP
		50M	These settings indicate the DVCPRO (50 Mbps format) playback mode.
			<Note>
		50Mp
			In the case of “50Mp”, the format can be determined; however, images and audio will
			not play back properly.
		25M	These settings indicate the DVCPRO (25 Mbps format), DV and DVCAM playback
		DV
			modes.
		DVCAM
REC*1	Recording format	1080i	The tape is recorded using the 1080i format.
	This displays the format	720p	The tape is recorded using the 720p format.
	used for recording.
TM INFO*2	Tape management	- - -	A cassette tape has not been inserted.
	information	24P
	This displays the frame	24PA	These settings indicate the recorded frame rate.
	rate (shooting speed)	25P
	information which is
		INVALID	The tape management information is invalid.
	recorded on a tape shot by
			<Note>
	a variable frame rate
			In some cases, the tape management information may be erroneously overwritten by
	camera.
			insert editing or tape dubbing, and it may not be possible to play back properly.
REF	Output reference	HD23	The HD REF input signal has been selected as the reference. The frame frequency
	This displays the output		is 23.98 Hz.
	reference status.
		HD24	The HD REF input signal has been selected as the reference. The frame frequency
			is 24 Hz.
		HD25	The HD REF input signal has been selected as the reference. The frame frequency
			is 25 Hz.
		HD50	The HD REF input signal has been selected as the reference. The field frequency is
			50 Hz.
		HD59	The HD REF input signal has been selected as the reference. The field frequency is
			59.94 Hz.
		HD60	The HD REF input signal has been selected as the reference. The field frequency is
			60 Hz.
		IN50	The HD serial input signal has been selected as the reference. The field frequency is
			50 Hz.
		IN59	The HD serial input signal has been selected as the reference. The field frequency is
			59.94 Hz.
		IN60	The HD serial input signal has been selected as the reference. The field frequency is
			60 Hz.
		INT23	The signal (23.98 Hz) from the internal generator has been selected as the
			reference.
		INT24	The signal (24 Hz) from the internal generator has been selected as the reference.
		INT25	The signal (25 Hz) from the internal generator has been selected as the reference.
		INT50	The signal (50 Hz) from the internal generator has been selected as the reference.
		INT59	The signal (59.94 Hz) from the internal generator has been selected as the
			reference.
		INT60	The signal (60 Hz) from the internal generator has been selected as the reference.
		NTSC59	The SD REF input signal has been selected as the reference. The field frequency is
			59.94 Hz.
		PAL50	The SD REF input signal has been selected as the reference. The field frequency is
			50 Hz.
		INT59N	The SD REF signal has been selected by the OUT REF setting. Since the SD REF
			signal is not input, the signal (59.94 Hz) from the internal generator is selected as the
			reference.
		INT50P	The SD REF input signal has been selected by the OUT REF setting. Since the SD
			REF signal is not input, the signal (50 Hz) from the internal generator is selected as
			the reference.

*1: This status is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*2: This status is not displayed when the 59/60 Hz or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

42