Panasonic AJ-HD1800P (continued), (continued), <OPERATION> (continued)

Setup menus (continued)

<OPERATION> (continued)

No./Item		Description of setting
118*1	For selecting whether to allow or inhibit
	recording on a tape which has been written by a
SP MODE	format other than DVCPRO HD-LP.
	0000	OFF
INH
	Recording on the cassette tape is allowed.
	0001	ON
	Recording on the cassette tape is inhibited.
	<Note>
	When [OFF] is selected, the inhibition/permission
	state for recording to a cassette tape follows Setup
	Menu No. 113 (REC INH).
119*1	For selecting whether or not to perform simul-
	taneous playback during normal recording.
CONFI REC	0000	OFF
	According to the settings in Setup Menu No. 140
	(OUTPUT), the simultaneous playback operation
	during normal recording shifts.
	EE	：EE output
	TAPE ：Simultaneous playback output
	0001	ON
	Regardless of the settings in Setup Menu No.
	140 (OUTPUT), simultaneous playback is always
	applied during normal recording.
131	For selecting what cue point operation is to be
	performed when the multi cue function has
PAGE MODE	been set to ON.
	0000	MANU
	Operation is confined within the selected page,
	and 6 cue points can be registered.
	0001	AUTO
	When the page whose cue points are being reg-
	istered becomes full, operation is automatically
	transferred to the next page, and registration is
	continued. A total of 60 cue points on up to 10
	pages can be registered.
132	For selecting whether to perform the
	registration operation if all the cue points have
ROTA MODE	already been registered when the multi cue
	function has been set to ON.
	0000	OFF
	No further cue points are registered.
	0001	ON
	The registration operation is continued. If “MANU”
	has been selected as the setup menu item No.131
	(PAGE MODE) setting, the next cue point is
	registered at CUE¢1 on the page concerned; if
	“AUTO” has been selected, it is registered at CUE01.
133	For setting the volume of the sound heard when
	the keys are touched.
KEY BEEP	0000	OFF
	0001	LOW
	0002	HIGH
134	For setting the volume of the alarm tone.
	0000	OFF
ALARM BEEP	0001	LOW
	0002	HIGH
	<Note>
	If the fan motor has shut down, the alarm tone is
	sounded at the HIGH volume level regardless of
	this setting.

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed.

No./Item		Description of setting
140*1	For selecting the output signals.
	0000	EE
OUTPUT	The input signals selected by setup menu items
	No.600 (VIDEO IN SEL) and No.713 (CH1 IN
	SEL) to No.724 (D IN SEL 78) are output.
	0001	TAPE
	<In the STOP mode>
	The signals played back from the tape are output.
	<During recording or editing>:
	The simultaneous playback signals are output.
	<Note>
	Output signals when recording and editing are
	selected in Setup Menu No. 119 (CONFI REC)
	and No. 302 (CONFI EDIT).
141*1	For setting what is to be controlled by the audio
	volume controls on the front panel.
VOLUME	0000	REC
	The controls function as REC volume controls.
	0001	PB
	The controls function as PB volume controls.
	0002	AUTO
	Normally, the controls function as PB volume
	controls. However, during recording or in the EE/
	INPUT CHECK status, they automatically func-
	tion as REC volume controls.
142*1	For selecting the conditions under which the
	AUDIO UNITY lamp on the front panel is to light.
AUDIO UNITY	0000	IN
	The lamp lights when all the audio input levels
	are set to the UNITY level.
	0001	OUT
	The lamp lights when all the audio output levels
	are set to the UNITY level.
	002	IN/OUT
	The lamp lights when all the audio input and out-
	put levels are set to the UNITY level.
143	For setting whether the lighting of the tape
	mechanism is to be set to ON or remain OFF.
CASSTT	0000	OFF
LIGHT	The mechanism does not light even when a cas-
	sette is inserted.
	0001	ON
	The mechanism lights when a cassette is
	inserted.
144	For switching the preset registration method for
	the time code.
TC INPUT	0000 NORMAL
	The time code is input starting with the left-most
	digit.
	0001	REV
	The time code is input from the high-order digit
	but is displayed from the right-most digit.
145	For selecting whether the LCD monitor display
	on the front panel is to be turned on or off.
FRONT LCD	0000	OFF
	The display is turned off.
	0001	ON
	The display is turned on or off in synchronization
	with the screen saver operation for the time code
	display area.
146	If the front operation or tape operation is not
	executed for some while, the time code display
SAVER DISP	switches to the screen saver display.
	For selecting the screen saver display format.
	0000	BLACK
	To the black display
	0001	LOGO
	To display [EX] logo animation

89