Panasonic KX-TDE100 installation manual 9 PRI30 Card KX-TDA0290CE/CJ, Function

3.5 Information about the Physical Trunk Cards

3.5.9PRI30 Card (KX-TDA0290CE/CJ)

Function

1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.

LEDs

RJ45

To NT1/Extension

To NT1/Extension

	For RJ45	BNC (TX)
120Ω	120Ω	BNC (RX)

For BNC 75Ω OR 75Ω

A B

Accessories and User-supplied Items

Accessories (included): Ferrite core × 1

User-supplied (not included): RJ45 or BNC connector

Notes

•In some countries/areas, this optional service card must not be connected to the Public Switched Telephone Network.

•When connecting this optional service card to the trunk, connect through an NT1; do not connect to the U interface of the trunk directly.

•Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot be used simultaneously.

•When connecting the RJ45 connector, attach the included ferrite core. Refer to "3.2.9 Attaching a Ferrite Core".

•This optional service card can be used for either trunk or extension connection, by setting the A/B switch or using the connector with appropriate pin assignments.

•To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.15.1 Starting the PBX".

CAUTION

PRI ports are SELV ports and should only be connected to SELV services.

Installation Manual 105