3.2 Installation of the PBX
3.2.13 Floor Standing (KX-TDE200 Only)
Notes
•Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of the shelf.
•Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the back of the shelf will not be blocked.
•Make sure that the surface behind the shelf is not made of wood.
•Be careful not to drop the shelf.
1.Install 4 anchor plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4 screws (A).
Screw (A) | Metal Bracket |
TOP
Anchor
Plug
Floor
Hammer |
Anchor |
Plug |
30 mm |
8 mm |
Screw (A)
Metal
Bracket
2.Remove the front cover of the shelf (refer to "3.2.3 Opening/Closing the Front Cover").
Installation Manual
75
