Panasonic KX-TDE100 installation manual Wall Mounting, Mounting the KX-TDA0158CE

3.9 Connection of DECT Portable Stations

3.9.8Wall Mounting

Mounting the KX-TDA0158CE

WARNING

•MAKE SURE THAT THE WALL THAT THE UNIT WILL BE ATTACHED TO IS STRONG ENOUGH TO SUPPORT THE UNIT (APPROX. 310 g). IF NOT, IT IS NECESSARY FOR THE WALL TO BE REINFORCED.

•ONLY USE THE WALL-MOUNTING EQUIPMENT (SCREWS, WASHERS) INCLUDED WITH THE UNIT.

•WHEN DRIVING THE SCREWS INTO THE WALL, BE CAREFUL TO AVOID TOUCHING ANY METAL LATHS, WIRE LATHS OR METAL PLATES IN THE WALL.

•WHEN THIS PRODUCT IS NO LONGER IN USE, MAKE SURE TO DETACH IT FROM THE WALL.

1.Place the reference for wall mounting (KX-TDA0158CE) on the wall to mark the 2 screw positions.

2.Install the 2 screws and washers (included) into the wall.

Notes

•Make sure that the screw heads are at the same distance from the wall.

•Install the screws perpendicular to the wall.

3.Hook the CS on the screw heads.

Washer

Drive the screw to this point.

CAUTION

Make sure the cables are securely fastened to the wall.

180 Installation Manual