3.15 Starting the PBX
3.15 Starting the PBX
3.15.1 Starting the PBX
CAUTION
•The SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before startup.
•Before touching the System Initialise Switch, discharge static electricity by touching ground or wearing an earthing strap.
•Once you have started the PBX and if you unplug the PBX, do not perform the following procedures to start the PBX again. Otherwise, your programmed data is cleared. To restart the PBX, refer to "5.1.4 Using the Reset Button".
•The PBX will continue to be powered even if the power switch is turned "OFF".
•The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near the equipment and is easily accessible.
System Initialisation Procedure
1.Slide the System Initialise Switch to the "SYSTEM INITIALIZE" position. RUN Indicator
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialise Switch
