Panasonic KX-TDE100 Registering the PS, Entering the PBX System Programming Mode Using a PT

3.9 Connection of DECT Portable Stations

Registering the PS

The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required. A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system programming.

Note

For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature Guide, and "2.1 PT Programming" in the PT Programming Manual.

Entering the PBX System Programming Mode Using a PT

Administrator Level

	#	System Password for Administrator—
PROGRAM/		for PT Programming

PAUSE = 1234

Note

means default value.

PS Registration

One PS can be registered to a maximum of 4 different PBXs.

Programming No.

3 digits

[690] PS No.

001to 128

ENTER

Extn. No.	To the PS
	operation	END
1 to 4 digits	below
	ENTER

Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355

Press POWER	Select	Select
for 2 seconds.	"Setting Handset".	"Registration".
		"Please wait".
Select	Select
"Register H/set".	"Base 1–4".
"Enter Base PIN".	PIN for PS Registration

C.Tone

4 digits

Installation Manual

175