
3.10 Connection of 2.4 GHz Portable Stations
3.10.8 Wall Mounting
Mounting the KX-TDA0151/KX-TDA0152
WARNING
•MAKE SURE THAT THE WALL THAT THE UNIT WILL BE ATTACHED TO IS STRONG ENOUGH TO SUPPORT THE UNIT (APPROX. 310 g). IF NOT, IT IS NECESSARY FOR THE WALL TO BE REINFORCED.
•ONLY USE THE
•WHEN DRIVING THE SCREWS INTO THE WALL, BE CAREFUL TO AVOID TOUCHING ANY METAL LATHS, WIRE LATHS OR METAL PLATES IN THE WALL.
•WHEN THIS PRODUCT IS NO LONGER IN USE, MAKE SURE TO DETACH IT FROM THE WALL.
1.Place the reference for wall mounting
2.Install the 2 screws and washers (included) into the wall.
Notes
•Make sure that the screw heads are at the same distance from the wall.
•Install the screws perpendicular to the wall.
3.Insert the upper and lower tabs of the wall mounting plate into the designated openings in the base unit.
KX-TDA0151/KX-TDA0152
Tabs