Panasonic KX-TDE100 D2I, D1I, D2J, D1J, D2K, D1K, D2L, D1L, D2M, D1M, D2N, D1N, D2O, D1O, D2P

3.6 Information about the Physical Extension Cards

Pin Assignments

Amphenol Connector

		No.	Signal Name	Function	No.	Signal Name	Function
50	25	1	D2A	Data port 1 (Low)	26	D1A	Data port 1 (High)
		2	D2B	Data port 2 (Low)	27	D1B	Data port 2 (High)
		3	D2C	Data port 3 (Low)	28	D1C	Data port 3 (High)
		4	D2D	Data port 4 (Low)	29	D1D	Data port 4 (High)
		5	D2E	Data port 5 (Low)	30	D1E	Data port 5 (High)
		6	D2F	Data port 6 (Low)	31	D1F	Data port 6 (High)
26	1
		7	D2G	Data port 7 (Low)	32	D1G	Data port 7 (High)
		8	D2H	Data port 8 (Low)	33	D1H	Data port 8 (High)
		9	D2I	Data port 9 (Low)	34	D1I	Data port 9 (High)
		10	D2J	Data port 10 (Low)	35	D1J	Data port 10 (High)
		11	D2K	Data port 11 (Low)	36	D1K	Data port 11 (High)
		12	D2L	Data port 12 (Low)	37	D1L	Data port 12 (High)
		13	D2M	Data port 13 (Low)	38	D1M	Data port 13 (High)
		14	D2N	Data port 14 (Low)	39	D1N	Data port 14 (High)
		15	D2O	Data port 15 (Low)	40	D1O	Data port 15 (High)
		16	D2P	Data port 16 (Low)	41	D1P	Data port 16 (High)
		17-25	Reserved	–	42-50	Reserved	–

LED Indications

Indication	Colour	Description
CARD STATUS	Green/	Card status indication
	Orange/Red	• OFF: Power Off
		• Green ON: Normal (all ports are idle)
		• Green Flashing (60 times per minute): Normal (a port is in use)
		• Orange Flashing: Detection of PT-interface CS connection (when
		starting up the PT-interface CS [Basic/High-density])
		• Red ON: Fault (includes reset)
		• Red Flashing (60 times per minute): Out of Service

124 Installation Manual