Panasonic KX-TDE100 Installing the Activation Key File in the SD Memory Card

2.1 Information about the Activation Keys

2.1.3Activation Key File

The corresponding number of IP trunks and IP telephones or enhanced features can be activated by installing the downloaded activation key file(s) in the SD Memory Card of the IPCMPR card using the KX- TDE Maintenance Console.

Installing the Activation Key File in the SD Memory Card

Make sure to install the KX-TDE Maintenance Console on the PC in advance, and connect the PC to the PBX. For details about the KX-TDE Maintenance Console, refer to "Guide for the KX-TDE Maintenance Console".

1.Start the KX-TDE Maintenance Console from the Start menu on the PC.

2.From the Utility menu, select File Transfer PC to PBX (SD Card). A dialogue box will be displayed.

3.Select the file to upload.

A window showing the upload progress will be displayed.

While transferring files to the SD memory card, the PBX automatically renames them according to the header information.

A message will be displayed when the transfer is complete.

4.Click OK.

5.Change the card status of all virtual cards to OUS.

6.From the Utility menu, select Refresh Activation Key.

A message will be displayed when refreshing is complete.

7.Click OK.

8.Change the card status of all virtual cards back to INS.

Notes

•It is necessary to restart the PBX to activate the UCAV2 activation key after performing the procedure above. To restart the PBX, refer to "5.1.4 Using the Reset Button".

•For information about programming activation keys using the KX-TDE Maintenance Console, refer to "2.7.3 [1-1]Slot—Activation Key" in the PC Programming Manual.

CAUTION

The activation key file can only be installed in the PBX with the MPR ID number entered when the activation key file was downloaded. The activation key file cannot be reissued unless the IPCMPR card crashes.

Installation Manual

43