![](/images/new-backgrounds/1298677/298677145x1.webp)
3.2 Installation of the PBX
3.2.12 Wall Mounting (KX-TDE100)
WARNING
•MAKE SURE THAT THE WALL THAT THE SHELF WILL BE ATTACHED TO IS STRONG ENOUGH TO SUPPORT THE SHELF. IF NOT, IT IS NECESSARY FOR THE WALL TO BE REINFORCED.
•ONLY USE THE
•WHEN DRIVING THE SCREWS INTO THE WALL, BE CAREFUL TO AVOID TOUCHING ANY METAL LATHS, WIRE LATHS OR METAL PLATES IN THE WALL.
•WHEN PLACING THE METAL BRACKET, MAKE SURE THAT THE "TOP" ARROW IS POINTING UPWARD.
•WHEN THIS PRODUCT IS NO LONGER IN USE, MAKE SURE TO DETACH IT FROM THE WALL.
Notes
•Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of the shelf.
•Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the back of the shelf will not be blocked.
•Make sure that the surface behind the shelf is not made of wood.
•Be careful not to drop the shelf.
•For details about the dimensions and weight of the PBX, refer to "1.4.1 General Description".
Installation Manual
73