
2. BitStorm 1900 Installation and Testing
Task 013: Configuring Remote Management
The MIU can be remotely managed via the management 10Base
Ethernet port as shown in Figure
BitStorm 1900."
Figure 2-20: Telnet Connection for the BitStorm 1900
TELNET Connection | CRAFT Connection |
to
Router
Ethernet Switch
BitStorm™ 1900
Decapus Cable
10Base ![]()
Ethernet Port
To access and configure the MIU SNMP function, clients will either use an SNMP Network Management Software solution (i.e., EMS 2.x, HP OpenView, CastleRock’s SNMPc, etc.) or Telenet into the MIU and use the CLI (Command Line Interface).
BitStorm 1900 Installation and Maintenance Guide |