Paradyne 1900 manual Using Snmp Network Management Software

2. BitStorm 1900 Installation and Testing

Using SNMP Network Management Software

If the client is using SNMP Network Management Software, our private MIB must be loaded into the user’s SNMP Network Manager using the procedure accompanying the specific Network Management Software.

A list of all supported MIBs and the private MIB can be found in document 1900-A2-GK40, BitStorm 1900 IP DSLAM Supported SNMP MIBs. This document and private MIBs can be downloaded from the Paradyne website at www.paradyne.com.

Using Telnet for Remote Provisioning and Management

NOTE: Before using the Telnet option for remote management, the MIU must

first be configured using the craft interface. This procedure is mandatory as an MIU I.P. address is required when accessing the MIU remotely.

The following steps and procedures are provided to aide in configuring the MIU and setting the traps. (This is intended as a brief overview. Refer to document 1900-A2-GK40, BitStorm 1900 IP DSLAM Supported SNMP MIBs, for more detailed information.)

Step Procedure

1.) Initiate a Telnet session:

a.) From Windows, click on the Start button, then select Run.

2-88 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00