Paradyne 1900 manual Rxkdyhfrpsohwhgwklvwdvn

2. BitStorm 1900 Installation and Testing

Step Procedure (continued)

15.) If changes to the configuration have been made, the system must be reset. Type reset and press <Enter>, then y to confirm.

NOTE: When logging back into the MIU, the new IP Address must be entered.

Refer to Table 2-3, “CLI (Command Line Interface) Commands,” on page 76, for additional CLI commands for remote management. Also, refer to document 1900-A2-GK40, BitStorm 1900 IP DSLAM Supported SNMP MIBs, for additional information.

STOP

<RX￿KDYH￿FRPSOHWHG￿WKLV￿WDVN￿

1900-A2-GN20-00 BitStorm 1900 Installation and Maintenance Guide 2-95