Paradyne 1900 manual Power Cable Harness, Power Connector Terminations

Appendix B. Cabling Specifications

Power Cable Harness

Figure B-11(shown below) illustrates the BitStorm 1900 cable harness. The BitStorm 1900 power cable assembly connects the DC power source to the BitStorm 1900 shelf. One BitStorm 1900 power cable harness contains connectors to support three BitStorm 1900 shelves.

Figure B-11: Power Cable Harness

Mate-N-Lok

Connector (4-prong)

Red and Black
Ring Clip Leads (4)	02-17206

Power Connector Terminations

The end of the BitStorm 1900 power cable assembly that connects to the power source has two red and two black leads. Each lead is terminated with 24-4 ring clips. If using a DC power supply, the BitStorm 1900 power cable assembly must terminate at the DC power source as shown in Table B-5. Refer to the WARNING label on the next page.

Table B-5: Terminal Connection for DC Power Source

Power Cable	Power Source	Terminal Connection
Connector
Red (2)	DC supply	Negative (-)
Black (2)	DC return	Positive (+)

B-130 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00