Paradyne 1900 manual Ifconfig -m 0 and press Enter

2. BitStorm 1900 Installation and Testing

Step Procedure (continued)

8.) If any of the information needs to be modified, type:

ifconfig -m 0 and press <Enter>.

9.) The screen above displays indicating you are connected remotely to the MIU and asks if you would like to change the IP address of the MIU. Press y .

10.) From this screen changes to the I.P. Address, Current Subnet Mask, MTU, and Set Default Gateway can be made. If there is no change, press <Enter> to continue to the next item. Do not change the MTU or MSS settings.

2-92 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00