Paradyne manual Task 014 Testing the BitStorm 1900 Installation, Step Procedure

2. BitStorm 1900 Installation and Testing

Task 014: Testing the BitStorm 1900 Installation

Testing a BitStorm 1900 installation includes the following tasks:

•Testing voice connectivity

•Testing data connectivity

•End-to-end connectivity

The following sections contain testing-related information followed by the BitStorm 1900 testing tasks. Testing tasks for network support equipment such as LAN/WAN routers are not included in this document.

BitStorm 1900 Testing Locations

Primary test points for installation include the following:

•Customer premises cross-connect containing the connections for the BitStorm 1900 and customer premises equipment

•Modem user locations

If the system is having trouble, other test points may be required.

Step Procedure

1.) Review the BitStorm 1900 Test Point Diagrams as follows:

•Figure 2-21, "Voice/Data System Test Points," on page 97 shows the schematic layout and primary test points of a BitStorm 1900 voice/data system.

•Figure 2-22,"Data-only System Test Points," on page 98 shows the schematic layout and primary test points of a BitStorm 1900 data-only system.

2-96 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00