
2. BitStorm 1900 Installation and Testing
Step Procedure | (continued) |
|
|
14.) From this screen changes to the Community Name,
Current Poll Interval, and Set Trap Targets
can be made. Refer to the following table as a guide for these settings. If there are no changes, press <Enter> to continue to the next item.
Setting |
| Description |
|
| |
|
| |
Community Name | The Community Name is used by SNMP V1 | |
| as a minimum security control tool much like a user | |
| ID and/or password. | |
| • | For this field, enter an identifier of up to 15 alpha |
| characters. | |
|
| |
Current Poll Interval | The Current Polling Interval | |
| provides the ability to set the poll interval in number | |
| of seconds. The SNMP Agent polls the modems | |
| every n seconds for trap conditions (alarms). | |
| (n=how often the equipment is polled.) | |
| • | The acceptable range is 5 to 60 seconds |
|
| (inclusive). |
| • | To disable the polling, set the poll interval to 0. |
|
| |
Set Trap Targets | Set Trap Targets is used to set the IP | |
| Address of the Network Management Stations | |
| where the SNMP Traps are designated to. | |
| • | Up to 3 Trap Targets can be set. |
|
|
|
BitStorm 1900 Installation and Maintenance Guide |
|