Paradyne 1900 manual Step Procedure, continued, 19 COM Port Settings

2. BitStorm 1900 Installation and Testing

Step Procedure (continued)

4.) Set the serial COM1 port terminal communication settings.

a.) Initiate a Terminal Session using terminal emulation software (i.e., Hyperterminal).

b.) Select the appropriate serial COM port from the pull down menu (i.e., COM1, COM2, etc).

c.) Verify the port settings are the same as shown in Figure 2-19, "COM Port Settings." and click OK.

Figure 2-19: COM Port Settings

2-74 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00