Paradyne 1900 manual Task 015 Testing Voice Connectivity, Step Procedure

2. BitStorm 1900 Installation and Testing

Task 015: Testing Voice Connectivity

This procedure checks the voice connectivity in BitStorm 1900 voice/ data applications.

Requirements

The following is required to do this procedure:

•External voice facility point-of-presence equipment installed

•Tip/Ring assignments

•Standard telecommunications hand-test telephone set

Step Procedure

1.) Identify the voice line being tested. Turn on the BitStorm 1900.

2.) Connect the hand test set Tip and Ring testers to the Tip/Ring pair at the customer premise cross-connect.

3.) Test for dial tone. A successful test indicates that voice service is passing through the filter shelf.

4.) If no dial tone is present, refer to “Chapter 3. BitStorm 1900 Maintenance” on page 103, for troubleshooting information.

STOP

<RX￿KDYH￿FRPSOHWHG￿WKLV￿WDVN￿

1900-A2-GN20-00 BitStorm 1900 Installation and Maintenance Guide 2-99