Paradyne 1900 manual Task 008 Installing Voice/Data & Filter Shelf Connections

2. BitStorm 1900 Installation and Testing

Task 008: Installing Voice/Data & Filter Shelf Connections

Use this procedure to connect the BitStorm 1900 to the EtherLoop cross-connect in voice/data applications.

Requirements

This procedure requires the following tools and materials:

•10 BitStorm 1900 cable harnesses

•10 intermediate cables

•10 BitStorm 1900 data cables

"Appendix B. Cabling Specifications," on page 115 contains the specifications for the cables and wiring required in this procedure.

Step Procedure

1.) Place and secure the dedicated EtherLoop cross-connect on the facility main distribution frame.

2.) Designate and label one side of each block as "Line/CPE," and the other side as "Voice."

3.) Review pin and pair assignments in Figure 2-2, "Pin and Pair Assignments for the Champ to Omni Grid Cable (Part #: 04-00007- 10)," on page 59.

2-58 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00