Paradyne manual Cable Connections, BitStorm 1900 Equipment Installation, Equipment Failure

3. BitStorm 1900 Maintenance

Cable Connections

It is important to ensure that all connections to the EtherLoop system are firmly seated and secured. An incomplete connection at any one point could cause the EtherLoop system to malfunction.

BitStorm 1900 Equipment Installation

BitStorm 1900 equipment is relatively simple to install. However, if an equipment card is installed in the wrong slot, or if the cards are not firmly seated in their backplane connectors, the EtherLoop system will not function.

Data Network Equipment Configuration

For an EtherLoop system to function, the data network supporting the system must be properly configured. For example, IP addresses must be correct, and the network router must be configured properly.

Equipment Failure

LEDs on the BitStorm 1900 shelf and on the modem indicate if any equipment failures have occurred in the EtherLoop system.

3-104 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00