Paradyne 1900 manual CLI Commands Description, Reset of the system

2. BitStorm 1900 Installation and Testing

Table 2-3: CLI (Command Line Interface) Commands

CLI Commands

Command	Description
PING	Enter to verify if an I.P. Address is valid.
RESET	Use to Reset or Reboot the system.
	(It is not advised to power down the system in order to perform
	a reset of the system.)
SNMP	Enter to review and/or modify the current SNMP configuration.
SYSINFO	Enter to access and review system information.
TIME	Enter to set the time.
VERSION	Enter to view the version of firmware currently loaded on the
	MIU.

2-78 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00