Paradyne 1900 Task 005 Installing the Circuit Packs, Step Procedure, Requirements, Stop, 2-48

2. BitStorm 1900 Installation and Testing

Task 005: Installing the Circuit Packs

Use this procedure to install the BitStorm 1900 circuit packs.

Requirements

This procedure requires the following:

•Grounded anti-static protection

WARNING: ESD (ELECTROSTATIC DISCHARGE) ! Anti- static protection required! When handling any circuit pack, you must wear grounded anti-static protection. The discharge of static electricity can damage the circuit packs.

Step Procedure

1.) Place anti-static strip on wrist and attach to the grounded rack.

2.) Remove the circuit pack from the anti-static packaging.

3.) Align the card in the appropriate slot.

4.) Seat the card by pressing firmly into place.

STOP

<RX￿KDYH￿FRPSOHWHG￿WKLV￿WDVN￿

2-48 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00