MIB Descriptions

Table C-2. Interfaces Group Objects (4 of 4)

Object

Description

Setting/Contents

ifOutOctets (ifEntry 16)

ifOutUcastPkts (ifEntry 17)

ifOutDiscards (ifEntry 19)

ifOutErrors (ifEntry 20)

Collects output statistics on data received by the interface.

Applies to the IMC and the Management port, if configured for Net Link. When the Management port is not configured as a Net Link, these statistics will not be collected, and an error status will be sent if access is attempted.

An integer number.

Extension to Interface Table (ifXTable)

This extension contains additional objects for the interface table. Supports only the following objects.

Table C-3. Extension to Interface Table (ifXTable)

Object

Description

Setting/Contents

 

 

 

ifName

Provides name of the

Interface text strings:

(ifXEntry 1)

interface.

H Management Port

 

 

 

 

H Terminal Port

 

 

H DDS Network

 

 

H User Data Port

 

 

H In-band Management Channel

 

 

 

ifLinkUpDown-

Indicates whether the link is

Only supports DDS network and User

TrapEnable

up or down, or enterprise-

data port.

(ifXEntry 14)

specific traps should be

SNMP Traps must be enabled for the

 

generated.

 

unit. See SNMP Traps Option,

 

 

 

 

Table A-12.

 

 

 

ifHighSpeed

Reflects the ifSpeed setting

This object is supported as read-only.

(ifXEntry 15)

for the interface.

 

 

 

 

ifConnector-

Indicates whether there is a

true(1) ± Will always have this value for

Present

physical connector for the

the DDS network, Management port,

(ifXEntry 17)

interface.

Terminal port, and User Data port.

 

 

false(2) ±Will always have this value for

 

 

the In-band Management Channel.

 

 

 

7610-A2-GB20-10

November 1997

C-7

Page 99 Page 101
Page 100
Image 100
Paradyne SNMP DSU, 7610 manual Extension to Interface Table ifXTable, IfXEntry
Page 99 Page 101
Top Page Image Contents