MIB Descriptions

Table C-8. General Port Table Objects (2 of 2)

Object

Description

Setting/Contents

 

 

 

rs232PortOut

Contains the port's output

Supports the following speeds for

Speed

speed in bits per second.

the:

(rs232PortEntry 6)

The rs232PortOutSpeed

H User data port: 64,000, 62,400,

 

 

object has the same values

60,000, 56,000, 54,400, 52,000,

 

as the rs232PortInSpeed

48,000.1

 

object.

H Management port: 24002, 4800,2

 

 

 

 

9600, 14,400, 19,200, 28,800,

 

 

38,400.

 

 

H Terminal port: 2400, 4800,

 

 

9600,14,400, 19,200, 28,800,

 

 

38,400.

 

 

 

1 The User Data port speed is a read-only value that can only differ from the DDS network speed if the In-band Management Channel is enabled.

2 This speed is only valid when the port is configured for asynchronous operation.

The following are not supported:

Hrs232PortInFlowType (rs232PortEntry 7)

Hrs232PortOutFlowType (rs232PortEntry 8)

Asynchronous Port Table Objects

The Asynchronous Port Table Objects contains an entry for the Management port when the port is configured for asynchronous operation and for the Terminal port. For this unit, entries in the table that are counters (rs232AsyncPortEntry 6±8) are used to collect statistics only and are not supported.

Table C-9. Asynchronous Port Table Objects (1 of 2)

Object

Description

Setting/Contents

 

 

 

rs232AsyncPort

Specifies the number of bits

Supports only the following values:

Bits

in a character.

7 ± 7-bit characters

(rs232Async

 

 

 

PortEntry 2)

 

8 ± 8-bit characters

 

 

 

rs232AsyncPort

Specifies the number of

Supports only the following values:

StopBits

stop bits supported.

one(1) ± One stop bit

(rs232Async

 

 

 

PortEntry 3)

 

two(2) ± Two stop bits

 

 

one-and-half(3)± One and a half stop

 

 

bits

 

 

 

C-14

November 1997

7610-A2-GB20-10

Page 107
Image 107
Paradyne 7610, SNMP DSU manual Asynchronous Port Table Objects, Rs232Async PortEntry