Paradyne 7610, SNMP DSU manual Testing3 state, Management port is

MIB Descriptions

Table C-2. Interfaces Group Objects (3 of 4)

Object	Description	Setting/Contents
ifOperStatus	Specifies the current	H Management port. When configured as
(ifEntry 8)	operational state of the	Net Link, up(1) and down(2) are based on
	interface.	the current state of the link-layer protocol.
		When configured for Alarms, the interface
		is always up(1). Never in testing(3) state.
		H Terminal port. Always up(1); never in
		testing(3) state.
		H User Data Port
		± up(1) ± No alarms
		± down(2) ± Alarms
		± testing(3) ± Test active
		H DDS Network Interface
		± up(1) ± DTR on, if supported by the
		DTE
		± down(2) ± DTR off, if supported by the
		DTE
		± testing(3) ± Test active
		H In-band Management Channel. When
		enabled, up and down are based on the
		current state of the physical and link layer
		protocols.
		± up(1) ± Operational and no active test
		on the DDS network interface
		± down(2) ± Not operational or disabled
		± testing(3) ± Test active on DDS network
		interface
ifLastChange	Indicates the amount	Contains the value of sysUpTime object at
(ifEntry 9)	of time the interface	the time the interface entered its current
	has been up and	operational state.
	running.
ifInOctets	Collects input statistics	An integer number.
(ifEntry 10)	on data received by
	the interface.
ifInUcastPkts
	Applies to the IMC and
(ifEntry 11)
	the Management port,
ifInDiscards	if configured for Net
(ifEntry 13)	Link. When the
	Management port is
ifInErrors	not configured as a Net
(ifEntry 14)	Link, these statistics
	will not be collected,
ifInUnknown
	and an error status will
Protos	be sent if access is
(ifEntry 15)	attempted.

C-6 November 1997 7610-A2-GB20-10