Paradyne SNMP DSU, 7610 manual Ending a Session, Switching Between Screen Work Areas

Using the ATI

Switching Between Screen Work Areas

Selecting Ctrl-a allows you to switch between the two screen work areas to perform all screen functions. To access the screen function area below the dotted line:

"Procedure

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line. The available selections for the first input field appear on the last line as shown below.

2.Select either the function's designated (underlined) character or press the tab key until you reach the desired function key.

Example:

To leave the current screen, enter e or E ( Exit).

3.Press Return. The function is performed.

4.To return to the screen area above the dotted line, press Ctrl-a again.

main/configuration/edit/user/mgmt
Device Name:	Model: 7610
MANAGEMENT PORT OPTIONS
Port Use:	Net Link
Port Type:	Synchronous
Clock Source:	Internal
Data Rate(Kbps):	9.6

Routing Information Protocol: None

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

Select: None, Net Link, Alarms

Ending a Session

Use the Exit function key from any screen to terminate the session.

"Procedure

1.Press Ctrl-a to go to the screen function key area below the dotted line.

2.Save changes if you have altered your configuration.

3.Select Exit and press Return. The Main Menu appears.

7610-A2-GB20-10 November 1997 2-7