Paradyne SNMP DSU, 7610 manual Ending an Active Test, Test Status Messages 1 Meaning

Testing

Ending an Active Test

A test initiated by the user can be ended by the user.

HA Test Timeout option is available to automatically terminate a user-initiated Loopback or Pattern test (as opposed to manually terminating a test) after it has been running a specified period of time. Refer to System Options, Table A-1.

Test Timeout does not pertain to tests commanded by the:

ÐNetwork, such as the network-initiated CSU and DSU Loopbacks.

ÐDTE, such as the DTE-initiated Local Loopback.

HOn each test screen is a command column. Pressing Return when the cursor is on the Start command stops the test.

HUse the Abort All Tests selection from the Test menu to stop all tests running on all interfaces, with the exception of network or DTE-initiated loopbacks. Command Complete appears when all tests on all interfaces have been terminated.

Test Status Messages

The Test Status Messages in Table 7-1 appear in the right-most column of the System and Test Status screen. For additional information on loopbacks, refer to Loopbacks, Table 7-2.

Table 7-1. Test Status Messages (1 of 2)

Test Status Message	Meaning
CSU Loopback Active	A CSU Loopback toward the network is currently active. Only
	applies to a test initiated by the user via the ATI or the NMS.
DSU Loopback Active	A DSU Loopback toward the network is currently active. Only
	applies to a test initiated by the user via the ATI or the NMS.
Lamp Test Active	The Lamp Test is active, causing the LEDs on the front panel to
	light.
Local Loopback Active	A local loopback toward the DTE is currently active.
Monitoring 511 on	DSU is monitoring a 511 test pattern on the network interface.
Network
Monitoring 511 on Port	DSU is monitoring a 511 test pattern over the DTE port.
Network-init. CSU LB	A CSU Loopback initiated by the network is currently active.
Active

7610-A2-GB20-10 November 1997 7-5